Configuring Dscp To Cos Mapping - Siemens RUGGEDCOM ROS v4.3 User Manual

RUGGEDCOM ROS
User Guide
Parameter
CoS
4. Click Apply.
Section 5.3.4

Configuring DSCP to CoS Mapping

Mapping CoS to the Differentiated Services (DS) field set in the IP header for each packet is done by defining
Differentiated Services Code Points (DSCPs) in the CoS configuration.
To map a DSCP to a Class of Service, do the following:
1. Navigate to Classes of Service » Configure DSCP to CoS Mapping . The DSCP to CoS Mapping table
appears.
Figure 112: DSCP to CoS Mapping Table
Select a DSCP level. The DSCP to CoS Mapping form appears.
2.
Configuring DSCP to CoS Mapping
Description
Value of the IEEE 802.1p priority.
Synopsis: { Normal, Medium, High, Crit }
Default: Normal
CoS assigned to received tagged frames with the specified IEEE
802.1p priority value.
Chapter 5
Setup and Configuration
185