Brother ADS-2600W Service Manual page 157

APPENDIX 2 DELETING USER SETTING INFORMATION
Initializes setting values registered in EEPROM including operation parameter and user
switch.
<Operation Procedure>
(1) Press the
(2) Press the [
[Initial Setup] box.
(3) Press the [Reset] box.
(4) Press the [All Settings] box.
(5) Press the [Yes] key.
(6) Press and hold the [Yes] key again. The EEPROM is initialized, and the machine returns
to the ready state.
key.
] or [ ] key to display "Initial Setup" on the LCD, and press the
App. 2-1 Confidential