Important Information; Replacing The Battery Pack (Small Parent Unit) - Philips Analogue monitor SCD450 User Manual

Important information

EN
18
Replacing the battery pack
If the battery pack of the small parent unit needs to be
recharged more often than usual, replace it with a new battery
pack. Only use rechargeable NiMH batteries.
1 Open the battery compartment cover (C-13) of the small
parent unit by sliding down the cover.
2 Disconnect the old battery pack (C-14) from it's power plug
and remove it.
3 Carefully connect the new battery pack to the power plug
and place inside the battery compartments.
4 Close the battery compartment cover (C-13).
(small parent unit)