SL1100
5.
In case a 2nd PCB is mounted, insert two Nylon-spacers into the specified holes, and fasten two
Metal-spacers into the specified holes. (Both Nylon and Metal spacers are provided with 080E/
008E/000E/1PRIU)
Fasten two screws to secure the 2nd PCB to the top of the 080E/008E/000E/1PRIU.
Expansion Interface Card
(2nd PCB)
Nylon-Spacers
Expansion Interface Card
(1st PCB)
6.
Following illustration shows an example for installing two expansion PCBs onto the KSU.
2nd PCB
1st PCB
2-38
J2
Figure 2-56 Mounting the 2nd Expansion Interface Card
Figure 2-57 Mounting Two Expansion Interface Cards
Screws
J1
Screw position
Both sides are
the same.
ISSUE 4.1 (R5.1)
2nd EXP.
PCB
Metal-Spacers
Installation