Connecting Kdb-D/Kdb-S - Samsung OfficeServ 7200 Installation Manual

OfficeServ 7200 Installation Manual/Ed.00
1.8

Connecting KDB-D/KDB-S

KDB-D and KDB-S are modules installed on a digital phone connected to the OfficeServ
7200 system. The KDB module enhances the functions of the phone and increases the
number of local ports according to module types.
The following example shows how a KDB module is installed on a DS-5000D series
digital phone:
1) Take off the plastic cover on the bottom surface of the phone.
Plastic cover
2) Insert the KDB module into the expansion module connector, and fasten the
KDB with screws.
© SAMSUNG Electronics Co., Ltd.
Cautions for connecting KDB module
KDB-D and KDB-S is only for a digital phone connected to the 8DLI Module, not for
a digital phone connected to the 16DLI/8COMBO Module.
Figure 7.13 Installing KDB Module (1)
KDB
Figure 7.14 Installing KDB Module (2)
CHAPTER 7. Connecting Stations and Additional Equipment
Page 7-11