Id Setup For Ip Trunk - NEC UNIVERGE SV8100 Programming Manual

Issue 11.0
Level:
IN
Description
Use Program 14-11 : ID Setup for IP Trunk to set the ID of each IP Trunk. This
program refers to incoming and outgoing IP Trunk calls. The ID is sent on an outgoing
IP Trunk call. This program is used only for H.323.
Input Data
Item
No.
01
Feature Cross Reference

2 - 164
Program 14 : Trunk, Basic Setup
Trunk Port Number
IP Trunk ID
Conditions
This Data is called IP trunk outgoing call, or IP trunk incoming call.

This ID is notified at IP trunk outgoing call.

It is not notified when ID is 0.

Incoming Call arrives to the trunk port of the same ID as ID notified from the

partner system.
IP Trunk – H.323

14-11 : ID Setup for IP Trunk

Item
UNIVERGE SV8100
001~200
Input Data
0~65535
(0 = No setting)
Program 14 : Trunk, Basic Setup
Default
0