Noting The Device Identification Data - Siemens SIMATIC ITP1000 Operating Instructions Manual

Commissioning the device
3.1 Preparations
3.1.2

Noting the device identification data

The device can be clearly identified with the help of the identification data in case of repairs
or loss.
The figures below are examples. The data of your device may differ from the data in these
examples.
Rating plate
The rating plate is located on the rear of the device.
Example:
COA label (Certificate of Authenticity)
The COA label is located on the rear of the device.
Note
Only for devices that are delivered with operating system.
The COA label is only found on devices that are delivered with installed operating system.
It is located on the underside of the device.
Example:
30
Operating Instructions, 05/2017, A5E37340160-AB
SIMATIC ITP1000