Ablg 202 - Miele ABLG 202 Installation Instructions Manual

ABLG 202

1) Suction side
The ABLG 202 external motor is
designed for installation inside the
house. Possible locations:
– In the attic or ceiling space
– In an adjoining room, e.g. a pantry or
garage
– In the kitchen, if sufficient insulation
is used
It can be installed in a vertical or
horizontal position.
If installing vertically please refer to
the installation instructions on the
next page.
The external motor is connected to the
rangehood by means of a control cable
and is operated by the controls on the
rangehood.
Please refer to the operating and
installation instructions for the
rangehood before installing the
external motor and ducting.
 Position the external motor in a
suitable location.
Pay particular attention to the
direction of the ducting.
 Mark the positions for the four motor
base plate holes on the installation
surface.
 Place the motor to one side.
 Drill four  8 mm holes in the
positions marked to a depth of
40 mm for securing the external
motor.
 Press S8 anchors into the drill holes
so that they are flush.
 Connect the installation mountings
through the fixing holes in the motor
unit base plate.
 Secure the motor with the screws
supplied.
Installation
17