Changing Gear Steps In The M Position; Gear Step Functions - Toyota COROLLA iM 2017 Service Manual

Changing gear steps in the M position

To enter 7-speed sport sequential shiftmatic mode, shift the shift lever
to M. Gear steps can then be selected by operating the shift lever,
allowing you to drive in the gear step of your choosing.
1
Upshifting
2
Downshifting
The gear changes once every time
the shift lever is operated.
The selected gear step, from M1 to
M7, will be displayed in the meter.
However, even when in the M position, the gear steps will be auto-
matically changed if the engine speed is too high, or too low.
■

Gear step functions

●
You can choose from 7 levels of engine braking force.
●
A lower gear step will provide greater engine braking force than a higher
gear step, and the engine speed will also increase.
■
If the 7-speed sport sequential shiftmatic mode indicator does not come
on even after shifting the shift lever to M
This may indicate a malfunction in the continuously variable transmission
system. Have the vehicle inspected by your Toyota dealer immediately.
(In this situation, the transmission will operate in the same manner as when
the shift lever is in D.)
■
When the vehicle comes to a stop with the shift lever in the M position
●
The transmission will automatically downshift to M1 once the vehicle is
stopped.
●
After a stop, the vehicle will start off in M1.
●
When the vehicle is stopped, the transmission is set at M1.
COROLLA iM_U (OM12K64U)
4-2. Driving procedures
133
4