System Overview - Siemens SIMATIC S5 Manual

IP 267
1

System Overview

As an intelligent input/output module, the IP 267 adds positioning to the
repertoire of the S5-100U programmable controller. The IP 267 controls
positioning processes independent of the execution times of the user programs in
the programmable controller and the CPU is not loaded by current positioning
jobs.
You can plug the IP 267 into slots 0 to 7 of the S5-100U where it occupies
addresses in the analog address area of the programmable controller (bytes 64 to
127). The IP 267 runs with all CPUs except the CPU 100 (6ES5 100-8MA01).
The IP 267 has the following performance characteristics:
• Serial interface to the S5-100U programmable controller
• Digital inputs for calibrating and limiting traversing ranges
• Status displays for various operating states
• Programmable pulse generator
• Interfaces for commercial stepper motor power sections with 5 V differential
inputs or other logic inputs in the range of 5 V to 30 V.
EWA 4NEB 812 6061-02a
System Overview
1-1
1