13. TECHNICAL INFORMATION................19 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Page 3
ENGLISH manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
Do not keep the appliance door open without • supervision to prevent to fall on it. Before any maintenance operation, deactivate the • appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam •...
ENGLISH • Do not drink and play with the water in the appliance. • Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. • The appliance can release hot steam if you open the door while a programme operates.
Salt container Cutlery basket Air vent Lower basket Rinse aid dispenser Upper basket Detergent dispenser 3.1 Beam-on-Floor • When the appliance has a malfunction, the red light flashes. The Beam-on-Floor is a light that is The Beam-on-Floor goes off...
5.2 Information for test info.test@dishwasher-production.com institutes Write down the product number (PNC) that is on the rating plate. For all the necessary information for test performance, send an email to: 6. SETTINGS 6.1 Programme selection When you activate the appliance, usually it is in programme selection mode.
Page 9
ENGLISH German de- French degrees mmol/l Clarke de- Water softener lev- grees (°dH) (°fH) grees 4 - 10 7 - 18 0.7 - 1.8 5 - 12 <4 <7 <0.7 < 5 1) Factory setting. 2) Do not use salt at this level. Whether you use a standard detergent to refill rinse aid.
There is also an acoustic signal that 2. Press sounds when the programme is • The indicators completed. By default this acoustic off. signal is deactivated but it is possible to activate it.
ENGLISH 8.2 How to fill the rinse aid It seems that the appliance is not working. The washing phase starts only dispenser after this procedure is completed. The procedure will be repeated periodically. 8.1 The salt container CAUTION! Only use salt specifically designed for dishwashers.
9. DAILY USE 9.2 Setting and starting a 1. Open the water tap. 2. Press the on/off button to activate programme the appliance. Make sure that the appliance is in The Auto Off function programme selection mode. • If the salt indicator is on, fill the This function decreases energy salt container.
ENGLISH Opening the door while the Cancelling the programme appliance operates Press and hold simultaneously If you open the door while a programme until the appliance is in is running, the appliance stops. It may programme selection mode. affect the energy consumption and the Make sure that there is detergent in the programme duration.
• Do not use more than the correct • Make sure that glasses do not touch quantity of detergent. Refer to the other glasses. instructions on the detergent • Put small items in the cutlery basket. packaging. • Put light items in the upper basket.
ENGLISH 11.1 Cleaning the filters The filter system is made of 3 parts. 5. Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter (A). Make sure that it is correctly 1.
11.2 Cleaning the spray arms • If you regularly use short duration programmes, these can leave Do not remove the spray arms. If the deposits of grease and limescale holes in the spray arms are clogged, inside the appliance. To prevent this,...
Page 17
ENGLISH Problem and alarm code Possible cause and solution The appliance does not fill • Make sure that the water tap is open. with water. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water The display shows authority.
Page 18
Refer to "Before first use", Authorised Service Centre. "Daily use", or "Hints and For alarm codes not described in the tips" for other possible table, contact an Authorised Service causes. Centre. Once you have checked the appliance, deactivate and activate the appliance.
ENGLISH Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for washing. Refer to "The water softener". • Silver and stainless steel cutlery were placed together. Avoid to put silver and stainless steel items close to- gether.
Capacity Place settings Power consumption Left-on mode (W) Power consumption Off-mode (W) 0.10 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption.