9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Ring Mode (ISDN MSN Last No. 0 or 00)
Selects the ring mode when receiving an incoming call with an MSN ending with "0" or "00".
Default
Ring All Extension for MSN
Value Range
Ring All Extension for MSN: Ring all ISDN extensions that are addressed with MSN.
Ring AN Extension for MSN: Ring only one of the ISDN extensions that are addressed with MSN.
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Network Configuration
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Port Type
Selects the port type.
Note
•
Each ISDN connection in a QSIG network must have a master port on one PBX and a slave port on
another PBX.
•
ISDN extensions can belong to an incoming call distribution group or idle extension hunting group. In
this case, an MSN can be assigned.
Default
CO
Value Range
CO: For connecting to public network
Extension: For connecting to extension
QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
458
PC Programming Manual
Document Version 2016-03