Connection to the control
5.2 Assigning the connection parameters
Requirement
This description is applicable to the PuTTYgen version 0.64:
Note
Note the central security information in Section Auto-Hotspot.
Operating sequence
1. Download the PuTTYgen program from the Internet
~sgtatham/putty/download.html).
2. Start the program.
3. Load the key file via "Load".
Note
If the key file is not shown, change the file extension to "*.*".
4. Select "Conversions > Export OpenSSH key" in the menu.
5. Select a password via the "Key passphrase" input field and confirm the assigned password
in the "Confirm passphrase" input field.
6. Assign a file name and click "Save".
Note
The file name does not need an extension. The string length is not specifically limited.
Result
You can now use the key file for authentication in AMM.
30
NOTICE
The SSH key file must be password protected.
(http://www.chiark.greenend.org.uk/
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA