Toshiba B-452-R Printer Driver Operating Manual page 88

Motor Temperature Warning
Memory Card Error
[How to recover from an error]
When an error like "NO PAPER" occurred on the printer, clear the cause of the error, and press the [RESTART] key
on the printer.
For details, please refer to the Owner's Manual of each printer.
Automatically show Status Windows when errors occur: When
periodically monitored and if an error occurred during printing, the status window is displayed.
Status Window Preferences:
Always on top:
window is always displayed on the top of all other
windows.
Hide titlebar: When checked, the titlebar of the
status window is hidden.
 Job Verification tab
Enables setting the print job monitoring method.
When either checkbox is checked, printing is
performed while verifying a completion of printing.
Since this feature is not supported, do not change
the default settings.
 Communication tab
Enables setting the timeout and polling interval for
the status monitoring are set. Do not change the
default settings.
Notes:

Be sure to disable the status monitor when uninstalling the
printer driver or changing the output port.

When the printer is used as a shared printer, the status
monitor window is not displayed on the client PC.

While the status monitor is displayed, the ON LINE LED blinks
periodically. This is not a failure.

DO NOT enable the status monitor for the printers other than
B-SX4T (203 dpi), B-SX4T-CN (203 dpi), B-SX5T (305 dpi),
B-SX5T-CN (305 dpi), B-SV4, B-SA4T (203 dpi), B-SA4T-CN
(203 dpi), B-SA4T (300 dpi), B-SA4T-CN (300 dpi), B-852-R,
B-452-R, B-462-R, B-EP2DL-G, B-EP4DL-G, B-SX6T (305
dpi), B-SX8T (305 dpi), B-EX4T1 (203 dpi), B-EX4T1 (305
dpi), B-EX4T2 (203 dpi), B-EX4T2 (300 dpi), B-EX4T2 (600
When checked, the status
Memory Write Error
Busy
- 86 -
Memory Error
RFID Setting Error
checked, the printer status is