21.4
Displaying PLC properties
The following PLC properties can be displayed in the "SIMATIC LAD" window:
● Operating state
● Name of the PLC project
● PLC system version
● Cycle time
● Machining time of the PLC user program
Procedure
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
1.
Select the "Start-up" operating area.
2.
Press the "PLC" softkey.
The ladder diagram display opens and displays the PLC information.
3.
Press the "Reset mach.time" softkey.
The data of the machining time is reset.
Ladder Viewer and Ladder add-on (828D only)
21.4 Displaying PLC properties
659