When Driving Vehicle In Country With Different Speed Unit; Turning The System On/Off; Speed Limit Sign Display - Toyota C-HR 2017 Owner's Manual

■

When driving vehicle in country with different speed unit

Since RSA recognizes signs based on the set unit of the meter, it is neces-
sary to change the set unit of the meter. Adjust the set unit of the meter to the
speed unit of signs in the current location. (P. 776)
■

Turning the system on/off

Press "" or "" of meter control
1
switches and select
(P. 128)
Press "" or "" of meter control
2
switches and select
.
■

Speed limit sign display

If the engine switch was last turned off while a speed limit sign was displayed
on the multi-information display, the same sign displays again when the
engine switch is turned to "ON" position (vehicles without a smart entry & start
system) or IGNITION ON mode (vehicles with a smart entry & start system).
■
Customization
Setting (e.g. speeding warning threshold) can be changed.
(Customizable feature: P. 776)
C-HR_OM_Europe_OM10528E
4-5. Using the driving support systems
.
, and press
335
4