4.4 Runtime Setup
Pre-installation Checks
For public disclosure
4.3.2 Initial Configuration
Perform the following procedure during initial startup.
➢ ➢ To configure the QuickPanel
1.
Tap Start
, point to Settings, then tap Control Panel.
2.
Configure the system clock.
From the Control Panel, double-tap System to configure a Network Device Name.
3.
Many applications, including Proficy Historian, require a unique Device Name.
Attention
From the Control Panel, double-tap Network and Dial-up Connections to
4.
configure network settings.
Run the
Backup Utility
5.
To download an application to a QuickPanel
between the unit and the development workstation. Refer to the section,
IC755CxS06RDx, IC755CxWxxCDx and
Downloading a Machine Edition Project.
+
display
From the
Date and Time
It is recommended to set a unique Device Name
for the QuickPanel
to save the settings.
+
Operator Interface, set up a data link
IC755CxSxxCDx, and the PME online help,
+
to avoid future conflicts.
Ethernet for
GFK-2847R 59