Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 296

ID
3803 Configuration
3804
3806
3808
3809
380E
380F
3810
3821
3829
382B
382E
382F
3830
3832
2-272
Hitachi Compute Blade 500 Series Management Module Setup Guide
Operation
Recording trigger
category
Changing power supply
module settings.
Access
Changing power supply
module settings
Changing management
LAN settings for
management module.
Changing management
LAN settings for switch
module.
Changing management
LAN settings for switch
module.
Changing VLAN
settings.
Creating VLAN settings.
Removing VLAN
settings.
Request of restoring to
factory default settings
for management
module.
Changing JP1/SC/BSM
cooperation settings.
Changing E-mail
settings.
Changing SNMP
settings.
Removing SNMP
setting.
Changing service
settings.
Creating a pair of SSH
host key.
Functional detail
Message
On Power supply module, setting is
changed. Channel:xxx Category:xxx
Detail:xxx Value:xxx
On Power supply module N, setting
is changed. Channel:xxx
Category:xxx Detail:xxx Value:xxx
Management LAN setting is
changed. Channel:xxx Category:xxx
Value:xxx
On Switch module N, LAN setting is
changed. Channel:xxx Category:xxx
Value:xxx
On Switch module N, LAN setting is
changed. (Apply Management
module setting) Channel:xxx
VLAN setting is changed.(Move
port) Channel:xxx Target:xxx
Partition:xxx
Switch module:xxx VLAN ID:xxx
VLAN is created on management
LAN port. Channel:xxx VLAN ID:xxx
Ext port:xxx
VLAN is removed on management
LAN port. Channel:xxx VLAN ID:xxx
Reset management module to
factory default setting. Channel:xxx
Category:xxx
JP1/SC/BSM connection setting is
changed.(command port#)
Channel:xxx Value:xxx
E-mail setting is changed.
Channel:xxx Category:xxx
Detail:xxx Value:xxx
SNMP setting is changed.
Channel:xxx Category:xxx
Detail:xxx Value:xxx
SNMP setting is removed
Channel:xxx Category:xxx
Number:xxx
xxx service setting is changed.
Channel:xxx Category:xxx
Value:xxx
SSH host key pair is created.
Channel:xxx