Yamaha fwx120 Operation Manual page 28

Connecting (to an existing network) as a transparent mode firewall
2 Enabling the DHCP server functions
2
1
2
28  FWX120 Operation Manual
Enable the DHCP server functions.
NOTE
If "DHCP client" is selected in the "Configure firewall 1/6" screen, "Disable DHCP server
function" will be selected.
If the product is not used as a DHCP server:
Click "Disable DHCP server function" to select it.
If the product is used as a DHCP server:
Click "Use DHCP server function" to select it, and then configure the following settings:
• Assigned IP address range: Enter the range of IP addresses that do not overlap with
the IP address of the product in numeric characters.
• netmask: Select the same value as the netmask of the product.
Click "Next".
The "Configure firewall 4/6" screen appears.
1
Specify
2
Click