Tips To Help You Save Energy; Guarantee Conditions; Trouble Shooting - Bosch Sensixx B22L Manual

Tips to help you
15
save energy
Steam production consumes the most energy.
To help minimise the energy used, follow the
advice below:
• Start by ironing the fabrics that require the
lowest ironing temperature.
Check the recommended ironing temperature
in the label on the garment.
• Try to Iron the fabrics while they are still
damp and reduce the steam setting. Steam
will be generated from the fabrics rather than
the iron. If you tumble dry your fabrics before
ironing them, set the tumble drier on the 'iron
dry' programme.
17

Trouble shooting

Problem Possible causes
Indicator light (11)
flashes
The steam
generator does
not come on.
The iron does not
heat up.
The iron begins to
smoke when
switched on.
Water flows
through the holes
on the soleplate.
Dirt comes out
through the
soleplate.
• Boiler and scale collector must
be rinsed.
• There is a connection problem.
• The main power button is not
switched on.
• The main power button is not
switched on.
• The temperature is set to a low
position.
• During first use: certain
components on the appliance
have been lightly greased at the
factory and may produce a little
smoke when initially heated.
• During subsequent use: the
soleplate may be soiled.
• The water is condensing inside
the pipes because steam is being
used for the first time or has not
been used for a long time.
• There is a build up of scale or
minerals in the steam tank.
• Chemical products or additives
have been used.
16

Guarantee conditions

The terms of the guarantee for this appliance
are in accordance with that stated by our
representative for the country in which it is sold.
The details of these conditions can be obtained
from the retailer from whom the appliance was
purchased. The purchase receipt must be
presented when making any claims against the
terms of this guarantee.
Solution
• Rinse the scale collector and the
boiler according to the cleaning
instructions in this manual (see
section 12).
• Check the mains cable (6), the plug
and the socket.
• Set the main power button (12) to
the "I" position (illuminated in red).
• Set the main power button (12) to
the "I" position (illuminated in red).
• Set the temperature to the desired
position.
• This is completely normal and will
stop after a short while.
• Clean the soleplate according to the
cleaning instructions in this manual.
• Point the iron away from the ironing
area and press the steam release
button until steam is produced.
• Use tap water mixed 50% with
distilled or demineralised water. To
prolong the optimum steam function,
mix tap water with distilled water 1:1.
If the tap water in your district is very
hard, mix tap water with distilled
water 1:2.
• Clean the soleplate with a damp cloth.
Never add products to the water.
13
BOS CH