Ring Over Page; Single-Line Connections; Speed-Dial Numbers - Samsung NX-308 Technical Manual

3feature 1999.9.15 12:44 PM 페이지16
NX-SERIES
HYBRID KEY SYSTEM
database from a remote location via a customer-provided modem to make
programming changes and view traffic reports as a troubleshooting aid. A customer
PC can also be connected directly to the Base board for on-site programming.

RING OVER PAGE

A system-generated ring tone can be programmed on a per-line basis to signal
over the external paging system when the system is in Night mode.

SINGLE-LINE CONNECTIONS

Single-line ports allow for the connection of a variety of single-line telephones,
facsimile and answering machines, external bells, modems, cordless phones,
and credit card machines. When connecting customer-provided equipment at
these stations, compatibility should be verified before purchase to ensure correct
operation. Connecting single-line telephones (SLT) to the system may require
some programming, depending on the SLT type.

SPEED-DIAL NUMBERS

MMC 80 IO PARAMETER
MMC 42 TRUNK ON/OFF ⇒ RING OVER PAGE: OFF
MMC 38 SLT DIALING TYPE (DTMF, PULSE)
SLT Related Timers
HOOK OFF
SLT F MIN
SLT F MAX
MMC 50 SYSTEM TIMERS
Data Security
MMC 39 DATA LINE
STATION SPEED-DIAL
Each station has the capability of storing up to twenty Speed-Dial
numbers: 00 to 19, each of which may contain a maximum 30 digits.
MMC 17 STATION SPEED-DIAL
SYSTEM SPEED-DIAL
The system can store up to 80 Speed-Dial numbers: 20 to 99, each of
which may contain a maximum 30 digits. These system Speed-Dial
numbers may be used by any station.
MMC 67 ASSIGN SYSTEM SPEED-DIAL
3 - 12
FEATURES SECTION