ISSUE 6.0
2.
Remove the switch-hook from the unit. Turn the tab toward the top. Then slide the hook-switch
into position. Refer to
Hook-switch hanger
3.
Install two screws into a wall. The screw heads must be remained about 3 mm (0.12").
83.5 mm
(3.287")
4.
Mount the telephone on the wall.
Wall-mounting
holes
Hardware Manual
Figure 2-114 Hook-Switch Hanger on page
Figure 2-114 Hook-Switch Hanger
Figure 2-115 Wall-Mount Screw Guide
Figure 2-116 Mounting the Multiline Telephone
2-81.
Hook-switch hanger
3 - 4 mm
1 - 3 mm
(0.12" - 0.16")
(0.04" - 0.12")
7 - 9.5 mm
(0.28" - 0.37")
Minimum 10 mm (0.39")
SL1100
Wall side
2-81