Internal Settings - Bosch DCN Next Generation Installation & User's Instructions

DCN Next Generation | Installation and User Instructions | Flush-mounted Devices
27.2.3 Rear view
The rear of the channel selector (refer to figure 27.3)
contains:
9 External headphones (solder pads) - Connect
an external headphones socket to the channel
selector (refer to section 27.5.2).
9
figure 27.3: Rear view
Bosch Security Systems | 2007-02 | 9922 141 70525
27.3

Internal settings

27.3.1 Introduction
The component side of the PCB of the channel selector
(refer to figure 27.4) contains solder spots. With these
solder spots, you can configure the channel selector.
X11
X12
X13
figure 27.4: Solder spots
table 27. 1 : Solder spots
Solder spot Function
X11 Auto-standby function
(refer to section 27.3.2).
X12 Volume increment/decrement
function (refer to section 27.3.3).
X13 Channel/volume restore function
(refer to section 27.3.4).
en | 188