Printing Trim Lines; Manual Paper Cutting - Epson surecolor p5000 Quick Reference Manual

|

Printing trim lines

6
Printing trim lines
When
Roll Paper/No Cut
line) between print jobs as a guide for manual cutting.
Press the r
Menu
1.
Press the d button to select
2.
Press the d button to select
3.
Press the r button to select
4.
Press the d or u button to select
5.
Press the button to save the setting. A check mark appears next to On.
OK
6.
Press the button to exit the menu.
7.
You can also specify trim lines from your printer driver software. For instructions, see the online User's
Guide.

Manual paper cutting

When
Roll Paper/No Cut
your print job is finished by pressing the
guide for manual cutting.
Note: The built-in cutter may not be able to cut some types of media. Heavy or thick media types may dull the
cutter.
Press the l button.
1.
Press the d button to select
2.
Run your print job.
3.
Press and release the
4.
If the paper cannot be cut by the built-in cutter, press the d button to feed the paper to the manual
5.
cutting position. Then cut it manually.
is selected as the paper type in the control panel, you can print a trim line (page
button.
, then press the r button.
Paper
Roll Paper Setup
Print Page Line
.
On
is selected as the paper type in the control panel, you can cut roll paper after
Roll Paper/No Cut
button to cut the paper using the built-in cutter.
, then press the r button.
.
button. See the above instructions on printing trim lines as a
, then press the button.
OK