Toshiba Q9 Installation And Operation Manual page 3

Introduction
Congratulations on the purchase of the new Q9 F
The Q9 F
LOW
motor to develop high starting torque and provide compensation for motor slip, which results in smooth,
quick starts and highly efficient operation.
The Q9 F
LOW
power to be routed around the ASD and applied directly to the motor. During bypass operation, the ASD is
removed from the system electrically via contactors. This feature allows for uninterrupted system
operation during ASD adjustments, modifications, or repairs when required.
The Q9 F
LOW
Mounting and Connections on page 19
The Q9 F
LOW
be accessed via the easy-to-use menu or via the Direct Access Numbers. These features, combined with
Toshiba's high-performance software, delivers unparalleled motor control and reliability.
The Q9 F
LOW
Electronic Operator Interface (EOI) of the Q9 F
also a model-specific control panel that provides toggle-switch control of the operating mode with an LED
display array to convey the system operational status.
The EOI and the control panel provide superior monitoring and control of the Q9 F
for easy-access programming for quick system changes when required.
The ASD software is menu-driven, simplifying motor control parameter changes when required.
To maximize the abilities of your new Q9 F
required. This manual has been prepared for the Q9 F
personnel. This manual may also be used as a reference manual or for training. With this in mind, use this
manual to develop a system familiarity before attempting to install or operate the device.
Important Notice
The instructions contained in this manual are not intended to cover all details or variations in equipment
types. Nor may it provide for every possible contingency concerning the installation, operation, or
maintenance of this equipment. Should additional information be required contact Toshiba's Customer
Support Center.
The contents of this manual shall not become a part of or modify any prior or existing agreement,
commitment, or relationship. The sales contract contains the entire obligation of Toshiba International
Corporation. The warranty contained in the contract between the parties is the sole warranty of Toshiba
International Corporation and any statements contained herein do not create new warranties or modify the
existing warranty.
Any electrical or mechanical modifications to this equipment without prior written consent of
Toshiba International Corporation will void all warranties and may void the UL/CUL listing or
other safety certifications. Unauthorized modifications may also result in a safety hazard or
equipment damage.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
S Adjustable Speed Drive is a solid-state AC drive. The Q9 F
AVER
S provides bypass functionality. Bypass operation allows for the three-phase input
AVER
S may be purchased either with or without an ASD included. See the section titled
AVER
for further information on the two versions of the Q9 F
S uses digitally-controlled pulse width modulation. The programmable functions may
AVER
S is a very powerful tool, yet surprisingly simple to operate. The user-friendly
AVER
S Adjustable Speed Drive (ASD)/Bypass Box.
LOW AVER
S has an easy-to-read LCD screen. There is
LOW AVER
S , a working familiarity with this manual will be
LOW AVER
S installer, user, and maintenance
LOW AVER
S enables the
LOW AVER
S .
LOW AVER
S and allows
LOW AVER