4. "PulseSteam" function
This appliance has a special function for
tackling difficult creases.
When the steam release button is activated,
the steam generator will release three
powerful shots of steam so that the steam
reaches even deeper into the fabrics.
Briefly press the steam shot button (15*) on
the top of the handle.
Remarks:
• It is possible to stop the shots of steam by
quickly pressing the steam button again.
• Some water drops may appear when you
use the "PulseSteam" function for the first
time.
The water drops will disappear after you
have used the function for some time.
5. "Intelligent steam" function
This system has intelligent steam control,
which, after releasing the steam release
button (14 or 15*), provides a small amount
of additional steam.
The additional steam can always be
stopped by briefly pressing the steam
release button once again.
10
B O SC H
6. Ironing without steam
Begin ironing but without pressing the
steam release button.
7. Vertical steam
This can be used to remove creases
from hanging clothes, curtains etc.
Warning!:
E
E
Never direct the steam jet at
garments that are being worn.
Never aim the steam at people or
animals.
1. Select "Jeans / • • •" programme to get
the optimal steam amount.
2. Hold the iron in an upright position 15 cm
away from the garment being steamed.
3. You can steam iron curtains and hanging
garments (jackets, suits, coats...) by
placing the iron in a vertical position and
pressing the steam release button (14 or
15*).
15 cm
15 cm
* Model dependent