LG LRN8640N User Manual page 45

The following table provides the description for each action.
Action Description
Recording Start a recording.
Snapshot Take snapshots.
Primary Live View When the one-picture screen layout is selected, the system displays
the live video from the linked camera immediately after an alarm is
generated.
When the live video from multiple cameras is displayed on the main
screen:


Preset Position Invoke a preset location, allowing you to point the linked camera at
the preset location upon the generation of an alarm.
To configure a preset location for a camera:
1.
2.
3.
4.
5.
LG Network Display an alarm window on the LG NVR Client, allowing you to be
Client aware of an alarm when you are not near the LRN8640N and to
remotely clear the alarm.
Full Screen View the video from the linked camera in full screen mode on the
Viewing main screen.
Secondary Send the video from the linked camera to the monitor connected to
Screen VGA the VGA or HDMI port of the LRN8640N.
Note that you will view the video in full screen mode on the
secondary screen.
Secondary Send the video from the linked camera to the monitor connected to
Screen HDMI2 the HDMI2 port of the LRN8640N.
Note that you will view the video in full screen mode on the third
screen.
44
If the linked camera is bound to one view window, a red square is
added to the view window after an alarm is generated.
If the linked camera is not bound to any view window, the system
assigns the top left view window to the linked camera, allowing
you to view the live video from this camera immediately after an
alarm is generated.
Right-click the corresponding view window and choose PTZ
Control.
Choose a location for the camera by using PTZ controls, which
are Up, Down, Left, and Right.
Click Advanced.
On the first page, enter a digit in the text box next to the Preset
Position parameter.
Click Save.
Alarming
Remarks
-
To configure snapshot
settings, choose Main
Menu >
Snapshot >Settings.
-
The numbers of preset
locations supported by
cameras vary according to
the camera type.
-
-
This option requires that a
secondary screen be
configured.
This option requires that a
third screen be configured.