Operation
2.9 After Moving to a New Location in the Office
2.9.1 Using the Same Extension Number and the Setting of
Your Previous Extension (Walking Station)
Used to move an extension to a new location in the office without re-programming.
Extension data such as extension number, One-Touch dialling memory remain the same after the re-
location of the extension.
This feature is convenient if you don't want to change the current extension setting (extension
number, etc.) after moving to a new location in the office.
To start
PT / SLT
Off-hook.
To end
PT / SLT
Off-hook.
•
The telephone type (PT, SLT) must be the same at the previous location and a new location.
•
Walking Station is not available in the following cases:
— If the extension is connected to a DHLC card (KX-TD50170).
— If the extension is connected to a HLC card (KX-T96170) in parallel.
— If the extension is in hands-free mode.
148
7
2
7
1
Dial 7271.
7
2
7
0
Dial 7270.
C.Tone
On-hook.
source
extension no.
Enter source
extension number.
C.Tone
On-hook.
User Manual