Panasonic SL-CT730 Operating Instructions Manual

Dear Customer
Thank you for purchasing this product.
Before connecting, operating or adjusting this product, please read the
instructions completely. Please keep this manual for future reference.
Note:
"EB" on the packaging indicates the United Kingdom.
EB EG GK GC

Troubleshooting guide

p The HOLD function is on, stopping buttons from being
No play.
operated. Cancel HOLD ( page 5).
p The batteries may be drained ( page 4).
p The disc isn't correctly set.
p The disc is scratched or dirty. (Tracks may be skipped
particularly with MP3 discs.)
p There is moisture on the lens. Wait for about an hour and
then try again.
p The lens is dirty: clean it with a blower (recommended product:
SZZP1038C). You cannot use a CD type lens cleaner. If the lens gets
marked with fingerprints, gently wipe them off with a cotton swab.
p Remove the plug and reinsert it as fully as possible.
p The unit may not read a track properly if shaken strongly
during disc reading.
p If there is no data between sessions on a multi-session
disc, play may not be possible.
p If there is a large amount of JPEG data etc. within a MP3 file,
sound may become muted and play may not be possible.
p If the disc contains data with different formats, sound
may stop being output or play may not be possible.
p If a CD-ROM format disc contains MP3 and other files,
only the MP3 files will be playable.
p Ensure the plugs are inserted firmly.
No sound or there is
p Wipe the plugs with a clean cloth.
a lot of noise.
p The disc is scratched or dirty.
p Sound interruption or noise may occur if the recording
quality of the disc (CD-R/RW) is poor.
p The elapsed playing time disappears and sound is
interrupted if bumps continue repeatedly.
Disc rotation stops Disc rotation stops and starts to save power.
and starts during play.
Operation sounds are There is some sound heard when a disc is being accessed
heard from the unit. or disc rotation starts.
p This doesn't work during random play.
Play doesn't resume from
p It may not work correctly under some conditions.
the last point stopped.
p Random play modes may be on ( page 6).
Play doesn't start
p The resume function ( above) is operating. If the lid
from the first track.
is opened while stopped (while the power is ON) the
resume function is cancelled.
G
SG
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
Before requesting service, make the following checks. If you are in doubt about some of the check points,
or if the solutions indicated in the chart do not solve the problem, consult your dealer for instructions.

Operating Instructions

Portable CD Player
SL-CT730
HOLD (Function lock)
The hold function stops the buttons from being operated. By keeping the hold
function on, you can stop the power from being switched on, play from being
stopped and other operations from being done by mistake.
p The unit and remote control each have independent HOLD switches.
Resume function
Play resumes from where last stopped. [If the lid is opened while stopped (while
the power is ON) the resume function is cancelled. The resume function is also
cancelled when the disc is changed.]
You can get extended play time by inserting dry cell batteries into the external
battery case, attaching it to the main unit and using the rechargeable and dry
cell batteries together.
Discs that can be played
Commercially
available music CD
(CD-DA)
Cannot specify point You may not be able to specify point A or B at the end of
A or B. disc.
Cannot change the If [ ] or [] is pressed before [ MEMO/
anti-skip mode. you cannot change the mode.
Digital Re-master Depending on the type of MP3 disc recording, the effect
does not work. may not appear.
Cannot hear the remote The remote control's operation tone may be off ( page 5).
control's operation tone.
p Remove the plug and reinsert it as fully as possible.
The remote control
p Use only the included remote control to operate this unit.
does not work properly.
The remote control Remove the plug and reinsert it as fully as possible.
display does not light.
p Use the specified or supplied nickel-metal hydride
Cannot recharge.
rechargeable batteries (HHF-AZ01/HHF-1P).
p You must insert two batteries before you can recharge them.
p The unit must be off before you can recharge.
The AC adaptor becomes This is normal.
warm during recharging.
The batteries are taking The batteries may take as much as 6 hours to recharge
a long time to recharge. under some conditions.
p This may occur the first time you recharge the batteries
Play time is short
after recharging. or if you haven't used them for a long time. Play time
should be restored after a few recharges.
p The batteries are drained if you leave the AC adaptor
connected after recharging is complete.
p If play is extremely short even after fully recharging the
batteries, the batteries may have exceeded their life.
(Rechargeable batteries can be recharged approximately
300 times.) Please purchase new nickel-metal hydride
rechargeable batteries (HHF-AZ01/HHF-1P).
p The indicator does not appear when the AC adaptor is connected.
The battery indicator
p The indicator may not appear correctly when using the
fails to appear or is
incorrect. rechargeable and dry cell batteries at the same time and
under certain conditions.
The unit stops working. Disconnect then reconnect all power sources (batteries and AC adaptor).
Power cuts off. If you connect or disconnect the AC adaptor, the power
cuts off even if batteries are inserted.
1 1
Extended play
CD-R/RW
WMA WMA WMA
CD-DA MP3 WMA cannot
be played
RQT8193-1B
F0905ST1095
DISP]