Main Board - Toshiba TDP-SW20 Service Manual

3.Main Board

Step Figure
1
2
②
3
4
5
Remove 1 screw.
Remove a shield board together with a tape.
Remove connector holder.
①
Note: For remove, Take an action from (1) to (2)for
Remove all off connectors.
Attention)
Since there are same shape of connectors been
used on this main board , in order to avoid any
confusion,
use color making on each male and female side
before disconnecting.
Remove 5 screws.
Explanation
attach.
Take an action from (2) to (1)for attach.
104