Advertisement
Stationary 2D code reader PD60
The hardware
Illumination control
The integrated LED illumination of PD60 can be
activated completely or only partially.
Evenly illuminated objects for reliable reading
Easy installation
Two LEDs project red spots on the working
surface. The correct working distance is indicated
when the two spots intersect and appear as one.
This combined spot also shows the centre of the
inspection area, which is useful for aligning the
sensors' field of view.
Easy and time-saving installation
Long range type
A long range type with 200mm working distance is
available.
High flexibility referring machine construction design
Robust aluminium body
PD60 can be used in harsh industrial environments.
Its compact aluminium housing and robust
connectors conform to the protection class IP67G.
Save and long-lasting equipment for industrial environment
6
11/2007
Without light
control
LED
Suitable distance
and position
Too close
200mm
Hand-held 2D code reader PD65
The hardware
Automatic light switching
With light
Reading under the optimum lighting conditions
control
is made possible by the automatic light switching
function. It switches between two lighting patterns
which grants greater reading.
Optimum reading conditions
Dual signal notification
Whether reading is possible or not will be
Too far
confirmed visually during operation.
(blurred)
Instant reading confirmation
Field of view
Handy and robust
25 x 20mm
Due to its ergonomic design it can also easily be
used with gloves.
For reading the hand reader gets pointed on a
particular part and the reading process starts by
pressing the trigger.
Applicable in rugged enviroment
Side
Diffused
lighting
lighting
Read OK
Green light + buzzer
Read not possible
OK
Orange light
NG
7
Advertisement
