Page 1 MN 00505-QRG09-HL Printed in the USA 8/08...
Page 2 Your dealership and the entire staff of Toyota Motor Sales, U.S.A., Inc. wish you many years of satisfied driving in your Moving the lever to “LOCK” will allow the door to be opened only from new Highlander.
Page 3: Table Of Contents
EMERGENCY FEATURES Seatbelts-Shoulder belt anchor Spare tire & tools Tire Pressure Monitoring (warning) System 28 Visit your Toyota dealer for information on customizing this feature. Programmable by customer. Refer to the Owner’s Manual for instructions and more information. ® HomeLink...
Page 4: Instrument Panel
OVERVIEW Instrument panel Steering wheel Automatic Air Conditioning controls (if equipped) Steering wheel audio controls Steering wheel climate controls Multi-information display button Voice command button Telephone controls Headlight and turn signal controls/Headlight, turn signal and front fog light controls Wiper and washer controls Multi-information display Audio system or navigation system-integrated audio system Theft deterrent system/Engine immobilizer indicator...
Page 5 Manual Air Conditioning Vehicles without navigation system Vehicles with navigation system Tire Pressure Monitoring (warning) System Cruise control Ignition (standard key) Tilt and telescopic steering lock release Power back door button Instrument panel light control 115V AC Power outlet ON/OFF switch Windshield wiper de-icer switch Power rearview mirror control Outside rearview mirror...
Page 6: Instrument Cluster
Front passenger occupant classification or front passenger airbag ON/OFF indicator Low engine oil pressure warning Malfunction/Check Engine indicator If indicator does not turn off within a few seconds of starting engine, there may be a malfunction. Have vehicle inspected by your Toyota dealer.
Page 7 Engine oil replacement reminder Low fuel level warning Open door warning Airbag SRS warning Master warning Automatic Transmission fluid temperature warning Low Tire Pressure Warning Electric power steering system warning Low windshield washer fluid level warning Theft deterrent/Engine immobilizer system indicator Headlight low/high beam indicator Turn signal indicator Tail light indicator...
Page 8: Keyless Entry 1
OVERVIEW Keyless entry Locking operation Without Smart Key system With Smart Key system With power back door Without power back door Push Unlocking operation Without Smart Key system With Smart Key system With power back door Without power back door Push ONCE: Driver door TWICE: All doors NOTE:...
Page 9: Smart Key System 1,2
Smart Key system (if equipped) Start function Green indicator ON Depress Push brake pedal Carrying NOTE: Gear shift lever must be in Park and brake pedal depressed. Power (without starting engine) Without depressing the brake pedal, pressing the “ENGINE START STOP” switch will change the operation mode in succession from: Accessories such as the radio will operate.
Page 10: Overview
OVERVIEW Fuel tank door release and cap Pull Turn Store NOTE: Tighten until one click is heard. If the cap is not tightened enough, Check Engine “ ” indicator may illuminate. Hood release Pull up latch and Pull raise hood Engage support rod...
Page 11: Engine Maintenance
Light control-Instrument panel Brightness control Engine maintenance Windshield washer fluid tank Engine oil filler cap Engine oil level dipstick Engine coolant reservoir Note: Regularly scheduled maintenance, including oil changes, will help extend the life of your vehicle and maintain performance. Please refer to the “Owner’s Warranty Information Booklet,”...
Page 12: Features/Operations
FEATURES/OPERATIONS Automatic Transmission Park* Reverse “D” Neutral Drive “S” mode “S” * The ignition switch must be “ON” and the brake pedal depressed to shift from Park. “S” (Sequential) mode Shift the shift lever to “S” position from “D” position. Floor shift type: : Upshift (push and release) : Downshift (pull and release)
Page 13: Auto Lock Functions 1
Auto lock functions Automatic door locks can be programmed to operate in two different modes, or turned OFF. -Doors lock when shifting from Park. -Doors unlock when shifting into Park. Refer to the Owner’s Manual for more details. Steering lock release Smart Key system Without Smart Key system Turn...
Page 14: Door-Power Back
FEATURES/OPERATIONS Tilt and telescopic steering wheel Angle Length Lock release lever Hold wheel, push lever down, set angle and length, and return lever. Note: Do not attempt to adjust while the vehicle is in motion. Moonroof (if equipped) Sliding operation Tilting operation Open Tilt...
Page 15: Seat Adjustments-Front
Seat adjustments-Front Manual seat Power seat Seat position (forward/backward) Seat cushion angle Height crank (driver side only) Seatback angle Seat position, cushion angle and height Driver seat leg support (if equipped) Lumbar support (driver side only) Seat adjustments-Rear Second row seat Without third seat With third seat Seat position (forward/backward)
Page 16: Seats-Head Restraints
FEATURES/OPERATIONS Seats-Head restraints Front Rear Angle (if equipped) Height Lock release button Lock release button Seats-Removing Center-Stow second row seat (1) Remove the second row console from the front center console box. (2) Lower the center head restraint. (3) Pull the strap, then fold down the seatback. (4) Pull the lever behind the second center seat and lift the rear of the seat to remove.
Page 17: Seats-Folding Down Second Row Seats
Seats-Folding down second row seats (if equipped) From outside Left side/center remote seat release Right side remote seat release (1) Pull up From inside (2) Fold down Windshield wipers & washers Front Single wipe Adjust frequency* Interval wipe * Intermittent windshield wiper frequency adjustment Slow Rotate to increase/decrease...
Page 18: Lights 1 & Turn Signals
FEATURES/OPERATIONS Lights & turn signals Headlights With DRL OFF switch Without DRL OFF switch Auto Headlights Headlights Parking lights Parking lights Auto DRL OFF Low beam High beam flasher High beam -Daytime Running Light system (DRL) (if equipped) Automatically turns on the turn signal lights at a reduced intensity.
Page 19: Power Outlets-12V Dc
Power outlets-12V DC Instrument panel (with seat heater) Instrument panel (without seat heater) Center console Luggage compartment Key/Engine switch must be in the “ACC” or “ON” position to be used. Power outlets-115V AC (if equipped) Beside second row seat ON/OFF switch Key/Engine switch must be in the “ON”...
Page 20: Multi-Information Display 2
FEATURES/OPERATIONS Multi-information display (if equipped) Push “DISP” to change information in the following: (1) Average gas mileage after refueling (2) Current gas mileage (3) Miles left on remaining fuel (4) Driving distance from engine start (5) Average gas mileage (6) Average gas mileage history Push and hold “DISP”...
Page 21: Telephone Controls (Bluetooth ® )
Telephone controls (Bluetooth ® (if equipped) Audio unit Microphone Steering wheel telephone controls Volume Voice command button End call Start call ® Bluetooth technology allows dialing or receipt of calls without taking hands from the steering wheel or using a cable to connect the telephone and the system.
Page 22 FEATURES/OPERATIONS Air Conditioning/Heating Front manual Air Conditioning Fan speed Outside rearview mirror (if equipped)/Rear window defogger Temperature selector Fresh or recirculated cabin air Airflow vent In “ ” or “ ” mode, use fresh air (“ ” indicator OFF) to reduce window fogging.
Page 23 Front automatic Air Conditioning Without rear Air With rear Air Conditioning Conditioning Automatic climate control ON Adjusting the temperature setting will cause the airflow vents, air intake and fan to adjust automatically. Windshield airflow/defogger Rear Air Conditioning ON/OFF Fan speed Outside rearview mirror (if equipped)/Rear window defogger Fresh or recirculated cabin air Temperature selector (front passenger side)
Page 24: Clock
FEATURES/OPERATIONS Rear automatic Air Conditioning (if equipped) Fan speed Temperature selector Airflow vent Automatic climate control ON Climate control OFF Seat heaters (if equipped) Driver’s seat Turn Push Push Front passenger’s seat Push knob to pop the controller out. Turn clockwise for heater. Clock Without multi-information display With multi-information display...
Page 25: Cruise Control
Refer to “Garage door opener,” Section 3-7 in the Owner’s Manual for more details. For programming assistance, contact the Toyota Customer Experience Center at 1-800-331-4331, or visit http://www.homelink.com. * HomeLink ® is a registered trademark of Johnson Controls, Inc.
Page 26 FEATURES/OPERATIONS Audio Preset buttons - functions in other Type 1 modes indicated above number Eject CD Mute View CD Station/CD text track scan Push to Push to turn Seek station/ adjust tone Push to skip ON/OFF Mode CD track select &...
Page 27: Steering Wheel Controls
RADIO To preset stations Tune in the desired station and hold down a preset button (1-6) until you hear a beep. Push desired preset button (1-6) to select. To scan stations Push and hold “SCAN” to scan preset stations. Push again to hold selection.
Page 28: Downhill Assist Control System (Dac)
FEATURES/OPERATIONS Rear seat entertainment system (if equipped) Remote control DVD player Headphone volume control and headphone jacks DVD screen 115V AC Power outlet ON/OFF switch Front audio system A/V input adapter 115V AC Power outlet Wireless headphones Downhill Assist Control system (DAC) (if equipped) Slip indicator blinking, DAC indicator DAC indicator blinking = DAC not engaged...
Page 29: Cup Holders
Hill-start Assist Control (HAC) Brake pedal HAC helps prevent rolling backwards on an incline. To engage, push further down on brake pedal while at a complete stop until a beep sounds and slip indicator illuminates. HAC holds for approximately 2 seconds after releasing brake pedal.
Page 30: Safety And Emergency Features
If the tire pressure indicator flashes for more than 60 seconds and then remains on, take the vehicle to your local Toyota dealer. Note: The warning light may come on due to temperature changes or changes in tire pressure from natural air leakage. If the system has not been initialized recently, setting the tire pressures to factory specifications should turn off the light.
Page 31: Seatbelts-Shoulder Belt Anchor
Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING 2 Wheel Drive 4 Wheel Drive Air Conditioning Anti-lock Brake System Accessory Automatic Locking Retractor Child Restraint System Downhill Assist Control DISP Display Electronic Control Unit Event Data Recorder Emergency Locking Retractor Electric Power Steering GAWR Gross Axle Weight Rating Gross Vehicle Mass...
Page 32: For Your Information
A wide variety of non-genuine spare parts and accessories for Toyota vehicles are currently available on the market. You should know that these parts are not covered by Toyota warranty and that Toyota is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 33 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 34 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
Page 35 This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Page 37 TABLE OF CONTENTS Adjusting and operating features such as door locks, Before driving mirrors, and steering column. When driving Driving, stopping and safe-driving information. Interior Air conditioning and audio systems, as well as other features interior features for a comfortable driving experience. Maintenance Cleaning and protecting your vehicle, performing do-it- and care...
Page 38 1-1. Key information Keys The following keys are provided with the vehicle. Vehicles without smart key system (type A) Master keys Valet key Key number plate Vehicles without smart key system (type B) Master keys Valet key Key number plate Vehicles with smart key system Electronic keys •...
Page 39 Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made by your Toyota dealer using the key number plate. (→P. 538) ■...
Page 40 1-1. Key information NOTICE ■ To prevent key damage ● Do not subject the keys to strong shocks, expose them to high tempera- tures by placing them in direct sunlight, or get them wet. ● Do not expose the keys to electromagnetic materials or attach any mate- rial that blocks electromagnetic waves to the key surface.
Page 41 1-2. Opening, closing and locking the doors ∗ Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Locks unlocks doors (→P.
Page 42 1-2. Opening, closing and locking the doors Opens the glass hatch (→P. 36) Locks unlocks doors (→P. 34) Unlocking and locking the doors Front door handles Grip the handle to unlock the doors. Make sure to touch the sensor on the back of the handle.
Page 43 1-2. Opening, closing and locking the doors Press the lock button to lock the doors. Back door handle Press the button to unlock the door. The door cannot be unlocked for 3 seconds after the door is locked. Lock the back door again when you leave the vehicle.
Page 44 1-2. Opening, closing and locking the doors Opening the glass hatch Press and hold the button to open the glass hatch. The glass hatch will pop up. The glass hatch can be unlocked only when the back door is closed. Lock the glass hatch again when you leave the vehicle.
Page 45 1-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of either of the outside front door handles.
Page 46 1-2. Opening, closing and locking the doors ■ Operation signals A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) ■ Conditions affecting operation The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system and wireless remote control from operating properly.
Page 47 1-2. Opening, closing and locking the doors The setting changes each time an operation is performed, as shown below. (When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat step 2.) Multi-information Unlocking doors Beep display Hold the driver's door han-...
Page 48 1-2. Opening, closing and locking the doors ■ Electronic key battery depletion ● The standard battery life is 1 to 2 years. (The battery becomes depleted even if the electronic key is not used.) If the smart key system or the wireless remote control function does not operate, or the detection area becomes smaller, the battery may be depleted.
Page 49 1-2. Opening, closing and locking the doors ● The doors may unlock if a large amount of water splashes on the door handle, such as in the rain or in a car wash. (The doors will automatically be locked after approximately 60 seconds if the doors are not opened and closed.) ●...
Page 50 1-2. Opening, closing and locking the doors ● When an alarm sounds: Take appropriate measures according to the following table. Alarm Situation Correction procedure Tried to lock the doors and Retrieve the elec- the glass hatch using the tronic key from the entry function while the passenger compart- electronic key is still inside...
Page 51 1-2. Opening, closing and locking the doors Alarm Situation Correction procedure Tried to close the driver’s door after carrying the key Shift the shift lever to outside the vehicle with the Interior and exte- P, turn the “ENGINE “ENGINE START STOP” rior alarms sound START STOP”...
Page 52 1-2. Opening, closing and locking the doors ■ Customization that can be configured at Toyota dealer It is possible to deactivate the smart key system etc. (Customizable features →P. 582) ■ Certification for the smart key system For vehicles sold in the U.S.A.
Page 53 1-2. Opening, closing and locking the doors...
Page 54 1-2. Opening, closing and locking the doors...
Page 55 1-2. Opening, closing and locking the doors...
Page 56 1-2. Opening, closing and locking the doors For vehicles sold in Canada NOTE: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.
Page 57 1-2. Opening, closing and locking the doors...
Page 58 1-2. Opening, closing and locking the doors...
Page 59 1-2. Opening, closing and locking the doors...
Page 60 1-2. Opening, closing and locking the doors...
Page 61 (→P. 36) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of emitting the radio waves. Then, consult your doctor to see if you should disable the entry function.
Page 62 1-2. Opening, closing and locking the doors Wireless remote control The wireless remote control can be used to lock and unlock the vehi- cle from outside the vehicle. Vehicles without smart key system (type A) Locks all doors Unlocks all doors Pressing the button unlocks the driver’s door.
Page 63 1-2. Opening, closing and locking the doors Vehicles without smart key system (type B) Locks all doors Unlocks all doors Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors. Pushing holding: Sounds alarm Pushing holding:...
Page 64 1-2. Opening, closing and locking the doors ■ Operation signals Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) Back door: A buzzer sounds and the emergency flashers flash twice to indicate that the back door has been opened/closed.
Page 65 1-2. Opening, closing and locking the doors ■ Key battery depletion Vehicles without smart key system The standard battery life is 1 to 2 years. (The battery becomes depleted even if the key is not used.) If the wireless remote control function does not operate, the battery may be depleted.
Page 66 Vehicles with smart key system →P. 38 ■ Customization that can be configured at Toyota dealer Settings (e.g. wireless remote control) can be changed. (Customizable features →P. 582) ■ Reversing the operation of the power back door Pressing the wireless remote control switch again while the power back door is operating will cause the operation to reverse.
Page 67 1-2. Opening, closing and locking the doors ■ Certification for wireless remote control For vehicles sold in the U.S.A. NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 68 1-2. Opening, closing and locking the doors...
Page 69 1-2. Opening, closing and locking the doors...
Page 70 1-2. Opening, closing and locking the doors For vehicles sold in Canada NOTE: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.
Page 71 1-2. Opening, closing and locking the doors...
Page 72 1-2. Opening, closing and locking the doors...
Page 73 1-2. Opening, closing and locking the doors...
Page 74 1-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. ■ Entry function (vehicles with smart key system) →P. 33 ■ Wireless remote control →P.
Page 75 1-2. Opening, closing and locking the doors ■ Door lock switch Locks all doors Unlocks all doors ■ Inside lock button Locks the door Unlocks the door Pulling the door handle can open the front door even if the lock button is in the lock posi- tion.
Page 76 1-2. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened from inside the vehicle when the lock is set. These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.
Page 77 Depending on the position of the electronic key, the key may not be detected correctly and the door may be locked. ■ Customization that can be configured at Toyota dealer Settings (e.g. door unlocking function) can be changed. (Customizable features →P. 582)
Page 78 1-2. Opening, closing and locking the doors CAUTION ■ To prevent an accident Observe the following precautions while driving the vehicle. Failing to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. ●...
Page 79 1-2. Opening, closing and locking the doors Back door The back door can be locked/unlocked and opened by the following procedures. ■ Locking and unlocking the back door Door lock switch →P. 67 Entry function (vehicles with smart key system) →P.
Page 80 1-2. Opening, closing and locking the doors ■ Opening the back door from the inside the vehicle (vehicles with power back door) Push and hold the switch to open/close. Pushing the switch again while the power back door is operat- ing will cause the operation to reverse.
Page 81 1-2. Opening, closing and locking the doors Canceling the power back door system (vehicles with power back door) Turn the main switch in the glove box off to disable the power back door system. The back door cannot be opened even with the wireless remote control power...
Page 82 1-2. Opening, closing and locking the doors ■ If the back door opener is inoperative The back door can be operated from the inside. Remove the cover. STEP Turn the lever. STEP ■ The power back door can be opened when ●...
Page 83 ■ Customization that can be configured at Toyota dealer Settings (e.g. wireless remote control) can be changed. (Customizable features →P. 582) CAUTION Observe the following precautions.
Page 84 1-2. Opening, closing and locking the doors CAUTION ■ Jam protection function (vehicles with power back door) ● Never try jamming any part of your body to activate the jam protection function intentionally. ● The jam protection function may not work if something gets caught just before the back door is fully closed.
Page 85 1-2. Opening, closing and locking the doors ∗ Glass hatch The glass hatch can be opened using the glass hatch opener or wire- less remote control. ■ Wireless remote control (vehicles without smart key sys- tem) →P. 54 ■ Entry function (vehicles with smart key system) →P.
Page 86 1-2. Opening, closing and locking the doors CAUTION ■ Operating the glass hatch ● Do not open the glass hatch while the vehicle is moving. ● Do not open the glass hatch while the rear wiper is switched on. (If the rear wiper is switched on while the glass hatch is opening, the wiper motor drive disc is swinging at the door panel.) ●...
Page 87 1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Manual seat Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver’s side only) Seat cushion (front) angle adjustment knob (driver’s side only) Pull up the lever until the lock is completely released.
Page 88 1-3. Adjustable components (seats, mirrors, steering wheel) Power seat Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch (driver’s side only) Vertical height adjustment switch (driver’s side only) Driver’s seat leg support adjustment switch (if equipped) Seat lumbar support adjustment switch (driver’s side only) Active head restraints When the occupant’s lower back...
Page 89 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Active head restraints Even small forces applied to the seatback may cause the head restraint to move. Pushing up a locked head restraint forcibly may appear the head restraint inner structure. These do not indicate problems. During rear-end collision...
Page 90 1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats ■ Second seats Seat position adjustment lever Seatback angle adjustment lever Pull up the lever until the lock is completely released.
Page 91 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Third seats (if equipped) The third seats do not have a seat adjustment function. Moving a second seat for third seats access (vehicles with third seats) ■ Getting in the vehicle (right side only) Pull up the lever and fold down the seatback.
Page 92 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Getting out of the vehicle (right side only) Lift the lever on the side of the seatback and fold down the seat- back. The seat will slide forward. Move the seat to the front-most position.
Page 93 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Folding down the second seats From inside Pull the lever to unlock the seat- back and then fold the seatback down. From outside (if equipped) Pull the lever. L: Left side and center second seats R:Right side second seat ■...
Page 94 1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the third seats (vehicles with third seats) ■ Before folding down the third seats Stow the third seat belt buckles. STEP Pass the seat belts through the STEP seat belt hangers. This prevents the shoulder belt from being damaged.
Page 95 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Folding down the third seats Pull the strap on the third seat- back fold-down lever toward you to fold down the seatback. Removing the second center seat ■ Before removing the second center seat Take out the side table from the STEP console box.
Page 96 1-3. Adjustable components (seats, mirrors, steering wheel) Pull the lock release lever to STEP remove the second center seat. Stow the second center seat in STEP the console box. STEP Make sure that the seat is securely locked in position and close the console box door.
Page 97 1-3. Adjustable components (seats, mirrors, steering wheel) Installing the second center seat ■ Before installing the second center seat Take out the second center seat STEP from the console box. STEP Remove the side table, if used, from the second seat. (→P.
Page 98 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ When adjusting a rear seat or removing the second center seat ● Be careful that the seat does not hit passengers or luggage. ● Do not recline the seat more than necessary when the vehicle is in motion to reduce the risk of sliding under the lap belt.
Page 99 1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints ■ Adjusting the head restraints Front seats Vertical adjustment Pull the head restraints up. Down Push the head restraint down while pushing the lock release Lock release button button. Angle adjustment (if equipped) Second seats Pull the head restraints up.
Page 100 1-3. Adjustable components (seats, mirrors, steering wheel) ■ When using the third seat head restraints (vehicles with third seats) To use To fold ■ Adjusting the height of the head restraints (except second center seat and third seats) Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
Page 101 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Installing the front head restraints and second seat outer head restraints STEP Align the head restraint with the installation holes. STEP Push down the head restraint to the lowest position while pushing the lock release button.
Page 102 1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 103 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the belt (front seats) Down Move the height adjuster up and down as needed until you hear a click. Seat belt pretensioners (front seats) The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to...
Page 104 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Pregnant women Obtain medical advice and wear the seat belt in the proper way. (→P. 94) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occu- pants.
Page 105 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system.
Page 106 If the pretensioner has activated, the seat belt becomes locked: it cannot be further extended, nor will it return to the stowed position. The seat belt cannot be used again and must be replaced at your Toyota dealer. ■ Child restraint lock function belt precaution Do not allow children to play with the child restraint lock function belt.
Page 107 ● Ensure that the belt and tab are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
Page 108 1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and STEP press the lever down. Adjust to the ideal position by STEP moving the steering wheel horizontally and vertically.
Page 109 1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. Manual anti-glare inside rear view mirror Normal position Anti-glare position Auto anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and automatically reduces the reflected light.
Page 110 1-3. Adjustable components (seats, mirrors, steering wheel) ■ To prevent sensor error (vehicles with auto anti-glare inside rear view mirror) To ensure that the sensors operate prop- erly, do not touch or cover them. CAUTION ■ Caution while driving Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.
Page 111 1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switches. Select a mirror to adjust. STEP Left Right Adjust the mirror. STEP Right Down Left...
Page 112 1-3. Adjustable components (seats, mirrors, steering wheel) Folding back the mirrors Push backward to fold the mir- rors. ■ The outside rear view mirrors can be operated when Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with smart key system The “ENGINE START STOP”...
Page 113 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ When driving the vehicle Observe the following precautions while driving. Failing to do so may result in loss of control of the vehicle and cause an acci- dent, resulting in death or serious injury. ●...
Page 114 1-4. Opening and closing the windows and moon roof Power windows The power windows can be opened and closed using the following switches. Closing One-touch closing (driver’s window only) Opening One-touch opening (driver’s window only) : Pressing the switch in the opposite direction will stop win- dow travel partway.
Page 115 1-4. Opening and closing the windows and moon roof ■ The power windows can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■...
Page 116 1-4. Opening and closing the windows and moon roof ∗ Moon roof Use the overhead switches to open, close, and tilt the moon roof up and down. ■ Opening and closing Open The moon roof stops slightly before the fully opened posi- tion.
Page 117 1-4. Opening and closing the windows and moon roof ■ The moon roof can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■...
Page 118 1-4. Opening and closing the windows and moon roof ■ Moon roof open reminder function (vehicles with multi-information dis- play) Vehicles without smart key system An alarm will sound when the driver’s door is opened with the moon roof not fully closed and the engine switch OFF.
Page 119 1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. ■ Before refueling the vehicle Vehicles without smart key system Turn the engine switch OFF and ensure that all the doors and windows are closed. Vehicles with smart key system Turn the “ENGINE START STOP”...
Page 120 1-5. Refueling Hang the fuel tank cap on the STEP back of the fuel filler door. Closing the fuel tank cap When replacing the fuel tank cap, turn it until a clicking sound is heard. After releasing your hand, the cap will turn slightly to the opposite direction.
Page 121 This may cause static electricity to build up, resulting in a possible ignition hazard. ■ When replacing the fuel cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 122 1-5. Refueling NOTICE ■ Refueling Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle's painted surface.
Page 123 1-6. Theft deterrent system ∗ Engine immobilizer system The vehicle's keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle's on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. Vehicles without navigation system Vehicles without smart key system: The indicator light...
Page 124 1-6. Theft deterrent system Vehicles with navigation system Vehicles without smart key system: The indicator light flashes after the key has been removed from engine switch to indicate that the sys- tem is operating. Vehicles with smart key sys- tem: The indicator light flashes after the “ENGINE START STOP”...
Page 125 1-6. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type of engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the key is in contact with a metallic object ● If the key is in close proximity to or touching a key with the security sys- tem (key with a built-in transponder chip) of another vehicle ■...
Page 126 1-6. Theft deterrent system...
Page 127 1-6. Theft deterrent system ● For vehicles sold in Canada This device complied with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.
Page 128 1-6. Theft deterrent system...
Page 129 1-6. Theft deterrent system NOTICE ■ To prevent damage to the key Do not modify, remove or disable the engine immobilizer system. If any unauthorized changes or modifications are made, the proper opera- tion of the system cannot be guaranteed.
Page 130 1-6. Theft deterrent system ∗ Alarm The system sounds the alarm and flashes the lights when forcible entry is detected. ■ Triggering of the alarm The alarm is triggered in the following situations. ● A locked door is unlocked or opened in any way other than using the wireless remote control door lock function or entry function (vehicles with smart key system).
Page 131 1-6. Theft deterrent system ■ Setting the alarm system Vehicles without navigation system Close the doors and hood, and lock all doors using the wireless remote control door lock function or entry function (vehicles with smart key sys- tem). The system will be set automatically after 30 sec- onds.
Page 132 1-6. Theft deterrent system ■ Deactivating or stopping the alarm Unlock the doors using the wireless remote control door lock function or the entry function (vehicles with smart key system). ■ Items to check before locking the vehicle To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following.
Page 133 1-6. Theft deterrent system Theft prevention labels (U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from sto- len vehicles. Do not remove under penalty of law.
Page 134 1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back in the seat. (→P. 79) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 135 1-7. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver's seat while driving. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.
Page 136 1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbags Driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas-...
Page 137 1-7. Safety information Airbag system components Curtain shield airbags SRS warning light Side airbags Driver airbag Front passenger airbag Driver’s seat position sen- Side and curtain shield air- bag sensors Driver’s seat belt buckle switch Front airbag sensors Driver knee airbag Front passenger’s seat belt buckle switch Airbag sensor assembly...
Page 138 1-7. Safety information The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag sensor assembly. The airbag sensor assembly consists of a safing sensor and an airbag sensor. In certain types of severe frontal or side impacts, the SRS airbag sys- tem triggers the airbag inflators.
Page 139 1-7. Safety information ■ Operating conditions (front airbags) ● The SRS front airbags will deploy if the severity of the frontal impact is above the designed threshold level, comparable to an approximate 15 mph (25 km/h) collision when the vehicle impacts straight into a fixed bar- rier that does not move or deform.
Page 140 1-7. Safety information ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. ●...
Page 141 1-7. Safety information ■ Types of collisions that may not deploy the SRS airbag (side airbags and curtain shield airbags) The SRS side airbag and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a colli- sion to the side of the vehicle body other than the passenger compartment.
Page 142 1-7. Safety information ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. Do not disconnect the battery cables before contacting your Toyota dealer. ● Any of the SRS airbags have been inflated.
Page 143 1-7. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly. The SRS airbags are supplemental devices to be used with the seat belts.
Page 144 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are...
Page 145 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not sit on the edge of the seat or lean against the dashboard. ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger.
Page 146 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not attach anything to or lean any- thing against areas such as the dash- board, steering wheel pad or lower portion of the instrument panel. These items can become projectiles when SRS driver, front passenger and knee airbags deploy.
Page 147 If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. ■ Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer.
Page 148 1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for front passenger. Vehicles without navigation system Vehicles with navigation system SRS warning light...
Page 149 1-7. Safety information Conditions and operation of the front passenger occupant classification system ■ Adult* “AIR BAG ON” and “AIR BAG OFF” indi- “AIR BAG cator lights ON” Indicator/ SRS warning light warning light Front passenger's seat belt reminder Flashing* light Front passenger airbag Side airbag on the front passenger seat...
Page 150 1-7. Safety information ■ Unoccupied “AIR BAG ON” and “AIR BAG OFF” indi- Not illumi- cator lights nated Indicator/ SRS warning light warning light Front passenger's seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Devices Curtain shield airbag in the front passen- Activated...
Page 151 1-7. Safety information : Never install a rear-facing child restraint system on the front pas- senger seat. A forward-facing child restraint system should only be installed on the front passenger seat when it is unavoidable. (→P. 147) : In case the indicator is not illuminated, consult this manual as for installing the child restraint system properly.
Page 152 1-7. Safety information CAUTION ■ Front passenger occupant classification system precautions Observe the following precautions regarding front passenger occupant clas- sification system. Failure to do so may cause death or serious injury. ● Wear the seat belt properly. ● Make sure the front passenger's seat belt tab has not been left inserted into the buckle before someone sits in the front passenger seat.
Page 153 Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not contact the front seatbacks.
Page 154 1-7. Safety information Child restraint systems A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.
Page 155 1-7. Safety information Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child. Rear facing ⎯ Infant seat/convertible seat Forward facing ⎯ Convertible seat Booster seat...
Page 156 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 157 1-7. Safety information CAUTION ■ Child restraint precautions ● A forward-facing child restraint system may be allowed to be installed on the front passenger seat only when it is unavoidable. A child restraint sys- tem that requires a top tether strap should not be used in the front passen- ger seat since there is no top tether strap anchor for the front passenger seat.
Page 158 1-7. Safety information CAUTION ■ When the child restraint system is not in use ● Keep the child restraint system properly secured on the seat even if it is not in use. Do not store the restraint unsecured in the passenger compartment. ●...
Page 159 1-7. Safety information Installing child restraints Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Chil- dren) system.
Page 160 1-7. Safety information Second seat: Anchor brackets (for top tether strap) Anchor brackets are provided for the second seats.
Page 161 1-7. Safety information Installation with LATCH system Fold the seatback while pulling STEP the lever. Return the seatback and secure it at the 1st lock posi- tion (most upright position). Adjust the seatback to the 3rd lock position. (→P. 82) 1st lock position 3rd lock position Type A...
Page 162 1-7. Safety information Type B Latch the buckles onto the STEP LATCH anchors. The bars are installed in the clearance between the seat cush- ion and seatback. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchors.
Page 163 1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) Rear facing ⎯ Infant seat/convertible seat ■ Place the child seat on the rear STEP seat facing the rear of the vehi- cle. Run the seat belt through the STEP child seat and insert the plate into the buckle.
Page 164 1-7. Safety information While pushing the child seat STEP down into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 165 1-7. Safety information While pushing the child seat into STEP the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 166 1-7. Safety information Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt. Child restraint systems with a top tether strap (second seat only) Secure the child restraint using STEP the seat belt or lower anchors, and adjust the head restraint to the upmost position.
Page 167 1-7. Safety information Outside seat: Open the anchor STEP bracket cover, latch the hook Front of vehicle onto the anchor bracket and tighten the top tether strap. Center seat: Latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched.
Page 168 1-7. Safety information CAUTION ■ When installing a booster seat Do not fully extend the shoulder belt to prevent the belt from going to ALR lock mode. (→P. 95) ALR mode causes the belt to tighten only which could cause injury or dis- comfort to the child.
Page 169 1-7. Safety information CAUTION ■ When installing a child restraint system ● When installing a child restraint system in the rear center seat, adjust both seat cushions to the same position and align seatbacks at the same angle. The seatbacks must be adjusted to the same angle. Otherwise, the child restraint system cannot be securely restrained and this may cause death or serious injuries in an accident.
Page 170 1-7. Safety information...
Page 171 2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing. ■ Starting the engine →P. 173, 177 ■ Driving STEP With the brake pedal depressed, shift the shift lever to D. (→P. 180) STEP Release the parking brake.
Page 172 ■ Breaking in your new Toyota To extend the life of the vehicle, the following precautions are recommended to observe: ●...
Page 173 Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodi- cally or whenever the parking brake shoes and/or drums are replaced. Have your Toyota dealer perform the bedding-down. ■ Operating your vehicle in a foreign country Comply with the relevant vehicle registration laws and confirm the availability of the correct fuel.
Page 174 Large amounts of exhaust in the vehi- cle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immediately. ●...
Page 175 2-1. Driving procedures CAUTION ● 4WD models: Do not drive across a river or through other bodies of water. This may cause electric/electronic components to short circuit, damage the engine or cause other serious damage to the vehicle. ● Do not drive in excess of the speed limit. Even if the legal speed limit per- mits it, do not drive over 85 mph (140 km/h) unless your vehicle has high- speed capability tires.
Page 176 The exhaust should be checked occasionally. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in...
Page 177 2-1. Driving procedures CAUTION ■ When taking a nap in the vehicle Always turn the engine off. Otherwise, you may accidentally move the shift lever or depress the accelerator pedal, which could cause an accident or fire due to engine overheating. Additionally, if the vehicle is parked in a poorly ventilated area, exhaust gases may collect and enter the vehicle, leading to death or a serious health hazard.
Page 178 If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. The rotor damage can result if the pads are not replaced when needed.
Page 179 Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following. ● Brake function ●...
Page 180 2-1. Driving procedures Engine (ignition) switch (vehicles with smart key system) Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch mode. ■ Starting the engine The engine can be started in any mode by operating the “ENGINE START STOP”...
Page 181 2-1. Driving procedures ■ Changing “ENGINE START STOP” switch modes Modes can be changed by pressing the “ENGINE START STOP” switch with the brake pedal released. (The mode changes each time the switch is pressed.) OFF* The emergency flashers can be used.
Page 182 ■ When the “ENGINE START STOP” switch indicator flashes in amber The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ Auto power off function If the vehicle is left in ACCESSORY mode for more than an hour with the shift lever in P, the “ENGINE START STOP”...
Page 183 2-1. Driving procedures CAUTION ■ When starting the engine Always start the engine while sitting in the driver's seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ■...
Page 184 2-1. Driving procedures Engine (ignition) switch (vehicles without smart key system) ■ Starting the engine STEP Check that the parking brake is set. STEP Check that the shift lever is set in P. STEP Sit in the driver’s seat and firmly depress the brake pedal. STEP Turn the engine switch to the “START”...
Page 185 2-1. Driving procedures ■ Turning the key from “ACC” to “LOCK” STEP Shift the shift lever to P. (→P. 180) STEP Push in the key and turn to the “LOCK” position. ■ Steering lock release When starting the engine, the engine switch may seem stuck in the “LOCK”...
Page 186 2-1. Driving procedures NOTICE ■ To prevent battery discharge Do not leave the key in the “ACC” or “ON” position for a long period if the engine is not running. ■ When starting the engine ● Do not crank for more than 30 seconds at a time. This may overheat the starter and wiring systems.
Page 187 2-1. Driving procedures Automatic Transmission Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever Vehicles without smart key system While the engine switch is in “ON” position, depress the brake pedal and move the shift lever. Vehicles with smart key system While the “ENGINE START STOP”...
Page 188 2-1. Driving procedures ■ Shift position uses Shift position Function Parking the vehicle or starting the engine Reversing Neutral Normal driving S mode driving (→P. 182) : Shifting to the D position allows the system to select a gear suitable for the driving conditions.
Page 189 2-1. Driving procedures Changing shift ranges in S mode Shift the shift lever to the S position and operate the shift lever. Upshifting Downshifting 2.7 L 4-cylinder (1AR-FE) engine The initial shift range in S mode is automatically set to 5 or 4 accord- ing to the vehicle speed.
Page 190 2-1. Driving procedures ■ Shift ranges and their functions Function Shift range 2.7 L 4-cylinder (1AR-FE) 3.5 L V6 (2GR-FE) engine engine Automatically selecting gears between 1 and 6 ⎯ according to vehicle speed and driving conditions. Automatically selecting gears between 1 and 5 according to vehicle speed and driving conditions.
Page 191 If the S indicator does not come on even after shifting the shift lever to This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the vehicle will operate as if the shift lever is in D.)
Page 192 2-1. Driving procedures Turn signal lever Right turn Left turn Move and hold the lever partway to signal a lane change. The right hand signal will flash until you release the lever. Move and hold the lever partway to signal a lane change.
Page 193 2-1. Driving procedures Parking brake Sets the parking brake* (Depress pedal again U.S.A. Canada releases the parking brake.) *: Fully depress the parking brake pedal with your left foot while depressing the brake pedal with your right foot. NOTICE ■ Before driving Fully release the parking brake.
Page 194 2-1. Driving procedures Horn To sound the horn, press on or close to the mark. ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (→P.
Page 195 2-2. Instrument cluster Gauges and meters Vehicles without smart key system The following gauges and meters illuminate when the engine switch is in the “ON” position. Vehicles with smart key system The following gauges and meters illuminate when the “ENGINE START STOP”...
Page 196 2-2. Instrument cluster Odometer/Trip meter Odometer Displays the total distance the vehicle has been driven. Trip meter Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently.
Page 197 2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. Instrument cluster Center panel (vehicles without navigation system)
Page 198 2-2. Instrument cluster Center panel (vehicles with navigation system) ■ Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Headlight indicator (→P. 185) (→P. 203) (U.S.A.) Headlight high beam Tail light indicator indicator (→P.
Page 199 They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details. ■ Warning lights Warning lights inform the driver of malfunctions in any of the vehicle’s systems.
Page 200 Have the vehicle inspected by your Toyota dealer immediately if this occurs.
Page 201 2-2. Instrument cluster ∗ Multi-information display The multi-information display presents the driver with a variety of driving-related data, including the current outside temperature and clock. ● Outside temperature Indicates the outside tempera- ture. The temperature range that can be displayed is from -40°F (-40°C) to 122°F (50°C).
Page 202 2-2. Instrument cluster ● Warning messages (→P. 521) Automatically displayed when a malfunction occurs in one of the vehicle’s systems. Trip information Push the “DISP” button to dis- play trip information. Display items can be switched by pressing the “DISP” button. ■...
Page 203 2-2. Instrument cluster ■ Average fuel consumption Displays the average fuel consumption since the function was reset. This function can be reset by pressing the “DISP” button for longer than one second when the average fuel consumption is displayed. When the function is reset, the previous five average fuel consumption values will automatically be displayed for six seconds.
Page 204 2-2. Instrument cluster ■ Setting the clock STEP Select “CLOCK” on the menu screen. Press and hold the “DISP” button until the display changes. Press the “DISP” button to adjust STEP the hours. After adjusting the hours, wait 5 seconds to allow the hours to be automatically input.
Page 205 2-2. Instrument cluster ■ Setting the display STEP Select “DISPLAY” on the menu screen. Press and hold the “DISP” button until the display changes. Select the desired item on the STEP menu screen. Press and hold the “DISP” button to enter the setting mode. ●...
Page 206 2-2. Instrument cluster ● Setting the brightness STEP Select “BRIGHTNESS” on the menu screen. Press and hold the “DISP” button until the display changes. Press the “DISP” button to adjust STEP the brightness. +: Brighter -: Darker After adjusting the brightness, wait 5 seconds to allow the bright- ness to be automatically input.
Page 207 2-2. Instrument cluster Setting up the rear view monitor display Display the set up screen on the STEP multi-information display when the vehicle is stopped and the rear view monitor is turned on. Press and hold the “DISP” button to display the set up screen. Select the desired item on the STEP menu screen.
Page 208 2-2. Instrument cluster ■ Setting the contrast STEP Select “CONTRAST” on the menu screen. Press and hold the “DISP” button until the display changes. Press the “DISP” button to adjust STEP the contrast. +: Strengthen -: Weaken After adjusting the contrast, wait 5 seconds to allow the contrast to be automatically input.
Page 209 When stopped, or driving at low speeds (less than 12 mph [20 km/h]), the correct outside temperature may not be displayed, or the display may take longer than normal to change. ■ Customization that can be configured at Toyota dealer Setting of language selection can be changed. (Customizable features →P. 582) NOTICE ■...
Page 210 2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Type A The side marker, park- ing, tail, license plate and instrument panel lights turn on. The headlights and all lights listed above turn U.S.A.
Page 211 2-3. Operating the lights and wipers Type B The side marker, park- ing, tail, license plate and instrument panel lights turn on. The headlights and all lights listed above turn The headlights and parking lights turn on and off automatically. (Vehicles without smart key system:...
Page 212 2-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. Pull the lever back to the center position to turn the high beams off. Pull the lever toward you to turn on the high beams.
Page 213 To turn the lights on again, turn the “ENGINE START STOP” switch to IGNI- TION ON mode, or turn the headlight switch off and then back to ■ Customization that can be configured at Toyota dealer Settings (e.g. daytime running light system) can be changed. (Customizable features →P. 582) NOTICE ■...
Page 214 2-3. Operating the lights and wipers ∗ Fog light switch The fog lights improve visibility in difficult driving conditions, such as in rain or fog. They can be turned on only when the headlights are on in low beam. Front fog lights on ∗...
Page 215 2-3. Operating the lights and wipers Windshield wipers and washer Wiper intervals can be adjusted for intermittent operation. Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary operation Increases the intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency...
Page 216 2-3. Operating the lights and wipers Wash/wipe operation Wipers operate automatically. ■ The windshield wipers and washer can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■...
Page 217 2-3. Operating the lights and wipers Rear window wiper and washer Intermittent window wiper operation Normal window wiper oper- ation Washer/wiper dual opera- tion Washer/wiper dual opera- tion ■ The rear window wiper and washer can be operated when Vehicles without smart key system the “ON”...
Page 218 2-4. Using other driving systems ∗ Cruise control Use cruise control to maintain a set speed without using the acceler- ator. Indicator Cruise control switch ■ Set the vehicle speed Turn the “ON-OFF” button on. STEP Press the button once more to deactivate the cruise control.
Page 219 2-4. Using other driving systems ■ Adjusting the speed setting Increase speed Decrease speed Hold the lever until the desired speed setting is obtained. Fine adjustment of the set speed can be made by lightly pushing the lever up or down and releasing it.
Page 220 Turn the “ON-OFF” button off once, and then reactivate the system. If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Contact your Toyota dealer and have your Toyota inspected. CAUTION ■...
Page 221 2-4. Using other driving systems Rear view monitor system (vehicles with multi-information display) Vehicles with navigation system Refer to the “Navigation System Owner's Manual”. Vehicles without navigation system The rear view monitor system assists the driver by displaying an image of the area behind the vehicle. The image is displayed in reverse on the screen.
Page 222 2-4. Using other driving systems ■ Displayed area The area covered by the camera is lim- ited. Objects that are close to either corner of the bumper or under the bumper cannot be seen on the screen. The area displayed on the screen may vary according to vehicle orientation or road conditions.
Page 223 2-4. Using other driving systems ■ Smear effect If a bright light, such as sunlight reflected off the vehicle body, is picked up by the camera, a smear effect* char- acteristic to the camera may occur. *: Smear effect: A phenomenon that occurs when a bright light is picked up by the camera;...
Page 224 Conditions which may affect the rear view monitor system ● If the back of the vehicle has been hit, the camera’s position and mounting angle may have changed. Have the vehicle inspected by your Toyota dealer. ● Rapid temperature changes, such as when hot water is poured on the vehicle in cold weather, may cause the system to function abnormally.
Page 225 2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ■...
Page 226 2-4. Using other driving systems When the Enhanced VSC/TRAC systems are operating If the vehicle is in danger of slip- ping, rolling backwards when starting on an incline, or the front wheels (2WD models) or four wheels (4WD models) spin, the indicator flashes to indicate that the Enhanced VSC/TRAC sys- tems have been engaged.
Page 227 2-4. Using other driving systems ■ Turning off TRAC and Enhanced VSC Push and hold the button while the vehicle is stopped to turn off TRAC and Enhanced VSC. The “TRAC OFF” and Enhanced VSC off indicator light should come on. Push the button again to turn the system back on.
Page 228 10 minutes. ■ If the slip indicator comes on... It may indicate a malfunction in the Enhanced VSC and TRAC. Contact your Toyota dealer. CAUTION ■ The ABS does not operate effectively when ●...
Page 229 The ABS and Enhanced VSC systems will not function correctly if different tires are fitted on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause the system to malfunction.
Page 230 2-4. Using other driving systems Hill-start assist control Hill-start assist control helps to prevent the vehicle from rolling backwards when starting on incline or slippery slope. To engage hill-start assist con- trol, further depress the brake pedal when the vehicle is stopped completely.
Page 231 • The shift lever is moved to P. • The parking brake is applied. • The brake pedal is depressed again. ■ If the slip indicator comes on... It may indicate a malfunction in the system. Contact your Toyota dealer. CAUTION ■ Hill-start assist control ●...
Page 232 2-4. Using other driving systems Downhill assist control system (4WD models only) With the downhill assist control system, the vehicle is able to descend a steep hill, maintaining a constant low speed of about 3 mph (5 km/h) without brake pedal operation. ■...
Page 233 Refrain from using the system until the downhill assist control system indicator stays on. (There is no problem with continuing driving normally.) ■ If the slip indicator comes on... It may indicate a malfunction in the system. Contact your Toyota dealer.
Page 234 2-4. Using other driving systems CAUTION ■ Conditions which may affect the downhill assist control system opera- tion ● Do not rely too heavily on the downhill assist control system. On extremely steep inclines, icy surfaces or muddy roads, the vehicle may slip and the system may not be able to maintain the constant low vehicle speed of about 3 mph (5 km/h), leading to an accident causing death or serious injury.
Page 235 2-5. Driving information Off-road precautions This vehicle belongs to the utility vehicle class, which has higher ground clearance and narrower tread in relation to the height of its center of gravity to make it capable of performing in a wide variety of off-road applications.
Page 236 2-5. Driving information CAUTION ■ Off-road vehicle precautions Always observe the following precautions to minimize the risk of serious per- sonal injury or damage to your vehicle: ● In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt.
Page 237 2-5. Driving information Off-road driving When driving your vehicle off-road, please observe the following pre- cautions to ensure your driving enjoyment and to help prevent the closure of areas to off-road vehicles. ● Drive your vehicle only in areas where off-road vehicles are permit- ted to travel.
Page 238 2-5. Driving information CAUTION ■ Off-road driving precautions Always observe the following precautions to minimize the risk of serious per- sonal injury or damage to your vehicle: ● Drive carefully when off the road. Do not take unnecessary risks by driving in dangerous places.
Page 239 2-5. Driving information NOTICE ■ When you drive through water If driving through water, such as when crossing shallow streams, first check the depth of the water and the bottom of the river bed for firmness. Drive slowly and avoid deep water. ■...
Page 240 2-5. Driving information Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load. ● Stow cargo and luggage in the luggage compartment whenever possible. Be sure all items are secured in place. ● Be careful to keep the vehicle level. Placing the weight as far for- ward as possible helps maintain vehicle balance.
Page 241 2-5. Driving information (6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. Example on your vehicle Cargo capacity Total load capacity...
Page 242 2-5. Driving information CAUTION ■ Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compart- ment. ● Receptacles containing gasoline ● Aerosol cans ■ Storage precautions Observe the following precautions. Failing to do so may result in death or serious injury.
Page 243 Roof luggage carrier precautions To use the roof rails as a roof luggage carrier, you must fit the roof rails with two or more genuine Toyota cross rails or their equivalent. When you load cargo on the roof luggage carrier, observe the following: ●...
Page 244 2-5. Driving information Vehicle load limits Vehicle load limits include total load capacity, seating capacity, towing capacity and cargo capacity. ■ Total load capacity: 1200 lb. (544 kg) Total load capacity means the combined weight of occupants, cargo and luggage. ■...
Page 245 2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside tem- peratures.
Page 246 2-5. Driving information ■ When driving the vehicle Accelerate the vehicle slowly and drive at a reduced speed suit- able to road conditions. ■ When parking the vehicle Park the vehicle and move the shift lever to P without setting the parking brake.
Page 247 2-5. Driving information ■ Tire chains Observe the following precautions when installing and removing chains. ● Install and remove tire chains in a safe location. ● Install tire chains on the front tires. ● Install tire chains following the instructions provided in the accompanying manual.
Page 248 NOTICE ■ Repairing or replacing snow tires Request repairs of and obtain replacement snow tires from Toyota dealers or legitimate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 249 The vehicle stability and braking performance are affected by trailer stability, brake setting and performance, and the hitch. Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Contact your Toyota dealer for further information about additional...
Page 250 2-5. Driving information Weight limits Confirm that the gross trailer weight, gross vehicle weight, gross axle weight and trailer tongue load are all within the limits. lb. (kg) Towing capacity 2.7 L 4-cylinder 3.5 L V6 (1AR-FE) engine (2GR-FE) engine Without towing package 1500 (680) 2000 (900)
Page 251 2-5. Driving information Towing related term Towing related term Meaning The maximum allowable gross vehicle weight. The gross vehicle weight is the total weight of the vehicle. When towing GVWR (Gross Vehicle a trailer, it is the sum of the vehicle Weight Rating) weight (including the occupants, cargo and any optional equipment installed on...
Page 252 2-5. Driving information Trailer tongue load ● A recommended tongue load varies in accordance with the types of trailers or towing as described below. ● In order to ensure the recommended values shown below, the trailer must be loaded by referring to the following instructions. The trailer cargo load should be distributed so that the tongue load is 9 to 11% of the gross trailer weight, not exceeding the following.
Page 253 2-5. Driving information Hitch Trailer hitch assemblies have different weight capacities established by the hitch manufacturer. Even though the vehicle may be rated for towing a higher weight, the operator must never exceed the maxi- mum weight rating specified for the trailer hitch. Trailer towing tips Your vehicle will handle differently when towing a trailer.
Page 254 2-5. Driving information ● Note that when making a turn, the trailer wheels will be closer than the vehicle wheels to the inside of the turn. Compensate by making a larger than normal turning radius. ● Crosswinds and rough roads will adversely affect handling of your vehicle and trailer, causing sway.
Page 255 2-5. Driving information ● Always place wheel blocks under both the vehicle and the trailer wheels when parking. Apply the parking brake firmly, and put the transmission in P. Avoid parking on a slope, but if unavoidable, do so only after performing the following: STEP Apply the brakes and keep them applied.
Page 256 Break-in schedule If your vehicle is new or equipped with any new power train components (such as an engine, transmission, differential and wheel bearing), Toyota recommends that you do not tow a trailer until it has been driven for over 2000 miles (3200 km).
Page 257 Do not tow the vehicle with the compact spare tire installed. ■ Hitches ● If you wish to install a trailer hitch, contact your Toyota dealer. ● Use only a hitch that conforms to the gross trailer weight requirement. ●...
Page 258 ■ When installing a trailer hitch ● Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper as this may cause body damage. ● Do not use axle-mounted hitches, as they can cause damage to the axle housing, wheel bearings, wheels or tires.
Page 259 2-5. Driving information Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with 4 wheels on the ground.
Page 260 2-5. Driving information...
Page 261 3-1. Using the air conditioning system and defogger ∗ Front manual air conditioning system Temperature control dial Fan speed control dial Outside air or recirculated air mode Air outlet selection dial Rear air conditioning Air conditioning on/off switch ∗ on/off switch Adjusting the settings ■...
Page 262 3-1. Using the air conditioning system and defogger ■ Adjusting the fan speed Turn the fan speed control dial clockwise (increase) or counter- clockwise (decrease). Turn the dial to “OFF” to turn the fan off. ■ Changing the air outlets Set the air outlet selection dial to an appropriate position.
Page 263 3-1. Using the air conditioning system and defogger Feet : Vehicles without rear air conditioning system Without rear air conditioning system Feet and windshield With rear air conditioning system Feet and windshield...
Page 264 3-1. Using the air conditioning system and defogger ■ Switching between outside air and recirculated air modes Press The mode switches between outside air mode (indicator off) and recircu- lated air mode (indicator on) modes each time is pressed. Defogging the windshield Set the air outlet selection dial to position.
Page 265 3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Front center outlets Direct air flow to the left or right, up or down. Front side outlets Direct air flow to the left or right, up or down.
Page 266 There may be a problem in the air conditioning system if the indi- cator light continues to flash. Turn the air conditioning system off and have it inspected by your Toyota dealer. ■ When...
Page 267 3-1. Using the air conditioning system and defogger CAUTION ■ To prevent the windshield from fogging up Do not set the air outlet selection dial to during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.
Page 268 3-1. Using the air conditioning system and defogger ∗ Front automatic air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Control panel Rear air conditioning Temperature control on/off switch for rear passengers Fan speed Windshield defogger Outside air or recirculated...
Page 269 3-1. Using the air conditioning system and defogger Multi-information display Airflow display Fan speed display Driver’s side Front passenger’s side tem- temperature Temperature setting dis- perature setting display setting dis- play for rear passengers play Using the automatic mode STEP Press The air conditioning system begins to operate.
Page 270 3-1. Using the air conditioning system and defogger Adjusting the settings ■ Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter- clockwise (cool). The air conditioning system switches between individual and simultaneous modes each time (without rear air conditioning system) or (with rear air conditioning system) is pressed.
Page 271 3-1. Using the air conditioning system and defogger ■ Changing the air outlets Press The air outlets switch each time either side of is pressed. The air flow shown on the display indicates the following. Upper body : Vehicles without rear air conditioning system Upper body and feet : Vehicles without rear air conditioning system Feet...
Page 272 3-1. Using the air conditioning system and defogger Without rear air conditioning system Feet and windshield With rear air conditioning system Feet and windshield ■ Switching between outside air and recirculated air modes Press The mode switches between outside air mode (indicator off) and recircu- lated air mode (indicator on) modes each time is pressed.
Page 273 3-1. Using the air conditioning system and defogger Changing the rear seat settings (if equipped) ■ Adjusting the temperature setting Press “∧” on to increase the temperature and “∨” to decrease the temperature. The air conditioning system switches between individual and simultaneous modes each time is pressed.
Page 274 3-1. Using the air conditioning system and defogger Front side outlets Direct air flow to the left or right, up or down. Turn the knob to open or close the vent. Rear center outlets (vehicles without rear air conditioning system) Direct air flow to the left or right, up or down.
Page 275 3-1. Using the air conditioning system and defogger ■ Window defogger feature Recirculated air mode may automatically switch to (outside air) mode in situations where the windows need to be defogged. ■ When outside temperature approaches 32°F (0°C) The air conditioning system may not operate even when is pressed.
Page 276 3-1. Using the air conditioning system and defogger ∗ Rear manual air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Changes the air outlets used Fan speed control dial Temperature control dial ∗ : If equipped...
Page 277 3-1. Using the air conditioning system and defogger Adjusting the settings ■ Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter- clockwise (cool). ■ Changing the air outlets Press the desired Air flows as shown below according to the mode selected. Upper body Upper body and feet...
Page 278 3-1. Using the air conditioning system and defogger Feet ■ Adjusting the fan speed Turn the fan speed control dial clockwise (increase) or counter- clockwise (decrease). Adjusting the position of and opening and closing the roof side air outlets Direct air flow to the left or right, up or down.
Page 279 3-1. Using the air conditioning system and defogger ∗ Rear automatic air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Fan speed display Airflow display Temperature setting display Temperature Fan speed control dial control dial Changes the air Automatic mode outlets used...
Page 280 3-1. Using the air conditioning system and defogger Adjusting the settings ■ Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter- clockwise (cool). ■ Changing the air outlets Press The air outlets change as follows each time is pressed.
Page 281 3-1. Using the air conditioning system and defogger Feet ■ Adjusting the fan speed Turn the fan speed control dial clockwise (increase) or counter- clockwise (decrease). Press to turn the fan off. Adjusting the position of and opening and closing the roof side air outlets Direct air flow to the left or right, up or down.
Page 282 3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers Clear the rear window using the defogger. Vehicles with manual air conditioning system On/off Press the button to turn on the rear window defogger. The indicator light will come on.
Page 283 3-1. Using the air conditioning system and defogger ■ The defogger can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■...
Page 284 3-1. Using the air conditioning system and defogger ∗ Windshield wiper de-icer This feature is used to prevent ice from building up on the wind- shield and wiper blades. On/off Press the button to turn on the windshield wiper de-icer. The indicator light will come on.
Page 285 3-1. Using the air conditioning system and defogger ∗ Using the steering wheel climate remote control switches Some air conditioning features can be controlled using the switches on the steering wheel. Temperature control Automatic mode Using the automatic mode STEP Press The air conditioning system will operate, and air outlets and fan speed will be set automatically.
Page 286 3-2. Using the audio system Audio system With navigation system Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. Without navigation system Type A: CD player and AM/FM radio (with CD changer controller) Type B: CD player with changer and AM/FM radio...
Page 287 3-2. Using the audio system Type C: CD player with changer and AM/FM radio Title Page Using the radio P. 284 Using the CD player P. 290 Playing back MP3 and WMA discs P. 297 Optimal use of the audio system P.
Page 288 3-2. Using the audio system CAUTION ■ For vehicles sold in U.S.A. and Canada ● Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment will void the user’s authority to operate this device. ●...
Page 289: Using The Radio
3-2. Using the audio system Using the radio Power Volume Scanning for receivable stations Station selector Adjusting the frequency (AM, FM mode) or Seeking the · AM/AM SAT*/FM channel frequency mode buttons (SAT mode) *: Type B and C Changing the program type ®...
Page 290 3-2. Using the audio system ■ Scanning all radio stations within range STEP Press All stations with reception will be played for 5 seconds each. STEP When the desired station is reached, press once again. ® Satellite Radio (type B and C) ®...
Page 291 3-2. Using the audio system ● Scanning preset channels STEP Press and hold until you hear a beep. STEP When the desired channel is reached, press again. ■ Displaying text information Press The display will show up to 10 characters. The display changes as follows each time the button is pressed.
Page 292 3-2. Using the audio system ■ When the battery is disconnected Stations presets are erased. ■ Reception sensitivity ● Maintaining perfect radio reception at all times is difficult due to the con- tinually changing position of the antenna, differences in signal strength and surrounding objects, such as trains and transmitters.
Page 293 XM antenna cable is attached securely. ANTENNA There is a short-circuit in the antenna or the sur- rounding antenna cable. See a Toyota certified dealer. ® You have not subscribed to the XM Satellite Radio. The radio is being updated with the latest ®...
Page 294 3-2. Using the audio system The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or “CH001”. If it does not change automatically, select another channel. ® Contact the XM Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877- 438-9677 (Canada).
Page 295: Using The Cd Player
3-2. Using the audio system Using the CD player Power Volume CD eject Reverse Displaying text message Search playback Fast-forward CD insert CD slot (type B and C) Playback CD selection (with a CD changer) Repeat play Random playback Track selection Loading CDs ■...
Page 296 3-2. Using the audio system ■ Loading multiple CDs (type B and C) STEP Press and hold until you hear a beep. “WAIT” is shown on the display. STEP Insert a CD when the indicator on the slot turns from amber to green.
Page 297 3-2. Using the audio system Fast-forwarding and reversing tracks ∧ To fast-forward or reverse, press and hold “ ” or “∨” on Scanning tracks STEP Press The first ten seconds of each track will be played. STEP Press again when the desired track is reached. Selecting a CD (with a CD changer) ■...
Page 298 3-2. Using the audio system Random playback ■ Current CD Press (RAND). Tracks are played in a random order until is pressed once more. ■ All CDs (with a CD changer) Press and hold until you hear a beep. Tracks on all loaded CDs are played in a random order until (RAND) is pressed once more.
Page 299 3-2. Using the audio system ■ Display Up to 12 characters can be displayed at a time. If there are 13 characters or more, pressing and holding for 1 second or more will display the remaining characters. A maximum of 24 characters can be displayed. is pressed for 1 second or more again or has not been pressed for 6 seconds or more, the display will return to the first 12 characters.
Page 300 3-2. Using the audio system NOTICE ■ CDs and adapters that cannot be used Do not use the following types of CDs, 3 in. (8 cm) CD adapters or Dual Disc. Doing so may damage the CD player and/or the CD insert/eject function. ●...
Page 301 3-2. Using the audio system NOTICE ■ CD player precautions Failure to follow the precautions below may result in serious damage to the CDs or the player itself. ● Do not insert anything other than CDs into the CD slot. ●...
Page 302: Playing Back Mp3 And Wma Discs
3-2. Using the audio system Playing back MP3 and WMA discs Power Volume Fast-forward CD eject Reverse Displaying text message Search playback CD insert CD slot (type B and C) File selection Playback CD selection (with a CD changer) Folder selection Repeat play File selection Random playback...
Page 303 3-2. Using the audio system Selecting and scanning a folder ■ Selecting folders one at a time Press “∧” or “∨” on to select the desired folder. ■ Selecting the desired folder by cueing the first file of each folder Press and hold until you hear a beep.
Page 304 3-2. Using the audio system Repeat play ■ To repeat a file Press (RPT). ■ To repeat all of the files on a folder Press and hold (RPT) until you hear a beep. Random playback ■ To play files from a particular folder in random order Press (RAND).
Page 305 3-2. Using the audio system ■ Display →P. 294 ■ Canceling random and repeat playback →P. 294 ■ Error messages “ERROR”: This indicates a trouble either in the CD or inside the player. The CD may be dirty, damaged or inserted up-side down. “NO MUSIC”: This indicates that the MP3/WMA file is not included in the ■...
Page 306 3-2. Using the audio system ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 307 3-2. Using the audio system ● Compatible disc formats The following disc formats can be used. • Disc formats: CD-ROM Mode 1 and Mode 2 CD-ROM XA Mode 2, Form 1 and Form 2 • File formats: ISO9660 Level 1, Level 2, (Romeo, Joliet) MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.
Page 308 3-2. Using the audio system ● Extensions If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.
Page 309: Optimal Use Of The Audio System
3-2. Using the audio system Optimal use of the audio system Displays the current mode Changes the following set- ting ● Sound quality and vol- ume balance (→P. 305) The sound quality and bal- ance setting changed to produce the best sound.
Page 310 3-2. Using the audio system Using the audio control function ■ Changing sound quality modes Pressing selects the mode to be changed in the following order. →“TRE”→“FAD”→“BAL”→“ASL”→“RSE”* “BAS”→“MID”* : Type C only : Vehicles with rear seat entertainment system ■ Adjusting sound quality Turning adjusts the level.
Page 311 3-2. Using the audio system ■ Adjusting the Automatic Sound Levelizer (ASL) Type A and B When “ASL” is selected, turning to the right changes the amount of “ASL” in the order of “LOW”, “MID” and “HIGH”. Turning to the left turns “ASL” off. ASL automatically adjusts the volume and tone quality according to vehi- cle speed.
Page 312: Using The Aux Adapter
3-2. Using the audio system Using the AUX adapter This adapter can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers. STEP Open the cover and connect the portable audio device. Vehicles without seat heater Vehicles with seat heater Press STEP...
Page 313 3-2. Using the audio system ■ Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle's audio controls. All other adjustments must be made on the portable audio device itself. ■ When using a portable audio device connected to the power outlet Noise may occur during playback.
Page 314: Using The Steering Wheel Audio Switches
3-2. Using the audio system ∗ Using the steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Volume Radio: Selects radio sta- tions CD: Selects tracks, files (MP3 and WMA) and discs Turns the power on, selects audio source Turning on the power...
Page 315 3-2. Using the audio system Adjusting the volume Press “+” on to increase the volume and “-” to decrease the volume. Press and hold to continue increasing or decreasing the volume. Selecting a radio station STEP Press to select radio mode. STEP Press “∧”...
Page 316 3-3. Using the rear audio system ∗ Rear seat entertainment system features The rear seat entertainment system is designed for the rear passen- gers to enjoy audio and DVD video separately from the front audio system. Front audio system Power outlet main switch Display Headphone volume control dials and headphone jacks DVD player...
Page 317 3-3. Using the rear audio system Opening and closing the display Press the lock release button to open the display. Pull the display down to an easily viewable angle (between 90° and 125°). To close the display, push the display up until a click is heard. The illumination of the screen is automatically turned off when the display is closed.
Page 318 3-3. Using the rear audio system Ejecting a disc Press and remove the disc. Headphone jacks To use the headphones, con- nect them to the jack. To adjust the volume Right side dial: Turn it toward the front of the vehicle to increase the volume.
Page 319 “REGION ERROR”: Indicates that the DVD region code is not set properly. “DVD ERROR”: Indicates that there is a problem inside the player. Eject the disc. Set the disc again. If the malfunction still exists, take the vehicle to your Toyota dealer.
Page 320 ● The operational range is reduced. ■ When using 3 AA batteries Batteries can be purchased at your Toyota dealer, electric appliance shop, or camera stores. Replace only with the same or equivalent type recommended by a Toyota dealer. Dispose of used batteries according to the local laws.
Page 321 3-3. Using the rear audio system ■ Headphones With some headphones generally available in the market, it may be difficult to catch signals properly. Toyota recommends the use of Toyota genuine wireless headphones. Please contact your Toyota dealer for further details. ■...
Page 322 3-3. Using the rear audio system NOTICE ■ For normal operation after replacing the battery Observe the following precautions to prevent accidents. ● Always work with dry hands. Moisture may cause the battery to rust. ● Do not touch or move any other components inside the remote control. ●...
Page 323 3-3. Using the rear audio system Using the DVD player (DVD video) ■ Remote controller Turning on the DVD mode Turning on or off the opera- tion switches (icon) on the display Selecting a chapter Reversing a disc Turning on the menu screen Turning on the title selection screen Searching the title...
Page 324 3-3. Using the rear audio system ■ Unit Turning on the DVD mode Skipping to the desired chapter Playing/pausing a disc Turning on or off the opera- tion switches (icon) on the display Selecting a switch (icon) Inputting selected switch (icon) ■...
Page 325 3-3. Using the rear audio system ■ Display (page 2) Displaying the initial setting screen Displaying page 1 Search for a title Returning to the previous screen Changing the audio lan- guage Changing the subtitle lan- guage Changing the angle ■...
Page 326 3-3. Using the rear audio system NOTICE ■ Cleaning the display Wipe the display with a dry soft cloth. If the screen is wiped with a rough cloth, the surface of the screen may be scratched. ■ To prevent damage to the remote controller ●...
Page 327 3-3. Using the rear audio system Returning to the previous screen Select to return to the previous screen. For the operation of the menu screen, see the separate manual for the DVD disc. Searching for a title Press or select display the screen to search for a title.
Page 328 3-3. Using the rear audio system Changing the audio language Press or select display audio language screen. Each time is pressed or is selected, another lan- guage stored on the disc is selected. Select to return to the pre- vious screen. Changing the angle Press or select...
Page 329 3-3. Using the rear audio system ■ DVD player and DVD video discs This DVD player is compatible NTSC color TV formats. DVD video discs conforming to other formats such as PAL or SECAM cannot be used. ■ Region codes Some DVD video discs have a region code indicating where you can use them.
Page 330 3-3. Using the rear audio system ■ DVD video disc glossary ● DVD video discs: Digital Versatile Discs that hold world’s standard video. DVD video discs have adopted “MPEG2”, one of the world standards of digital compression technologies. The picture data is compressed by 1/ 40 on average and stored.
Page 331 3-3. Using the rear audio system ■ Audio Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, © are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights reserved. “dts” is a trademark of Digital Theater Systems, Inc.
Page 332 3-3. Using the rear audio system Using the DVD player (video CD) ■ Remote controller Selecting a switch (icon) Selecting a chapter Playing/pausing a disc Reversing a disc Displaying operation switches (icon) Inputting selected switch (icon) Fast forwarding a disc Stopping a disc Changing the initial setting ■...
Page 333 3-3. Using the rear audio system ■ Display (page 1) Selecting a disc menu num- Turning off the menu screen Displaying page 2 Turning on the disc menu Returning to the previous page screen (with the disc menu displayed) Proceeding to the next page screen (with the disc menu displayed) Changing to a multiplex...
Page 334 3-3. Using the rear audio system ■ Operating from the front audio system Selecting a chapter This operation is available only when the DVD player system is selected for the speakers. Selecting either the front audio system or DVD player audio for the speakers Selecting a disc menu number Select...
Page 335 3-3. Using the rear audio system Using the DVD player (audio CD/CD text) Using control screen, press to display the control screen. Repeat play Random playback Search playback ■ Operating from the front audio system Selecting a track This operation is available only when the DVD player system is selected for the speakers.
Page 336 3-3. Using the rear audio system Using the DVD player (MP3 discs) ■ Using the control screen Press to dis- play the control screen. Repeat play Random playback Search playback Displaying file information Selecting a folder ■ Operating from the front audio system Selecting a file This operation is available only when the DVD player system...
Page 337 3-3. Using the rear audio system Repeat play ■ Repeat a file Select ■ Repeat all of files in a folder Select , and press and hold Random playback ■ Playing files from a particular folder in random order Select ■...
Page 338 3-3. Using the rear audio system Using the video mode Press to select the video mode. Before switching to the video mode, connect audio source input adapter. Using the adapter Open the cover. The A/V input adapter is com- posed of 3 input adapters. Yellow: Image input adapter White: Left channel audio input adapter...
Page 339 3-3. Using the rear audio system NOTICE ■ When the A/V input adapter is not in use Keep the A/V input adapter cover closed. Inserting anything other than an appropriate plug may cause electrical fail- ure or short circuit.
Page 340 3-3. Using the rear audio system Changing the initial setting Press or select display initial setting screen. The following initialization can be changed here. ● “Audio Language” ● “Subtitle Language” ● “DVD Language” ● “Angle Mark” ● “Parental Lock” Changing the audio language Select “Audio Language”.
Page 341 3-3. Using the rear audio system Changing the subtitle language Select “Subtitle Language”. Select the language you want to read, and press to input it. Select “Others” if you cannot find the language you want to read. Enter the appropriate 4-digit lan- guage code.
Page 342 3-3. Using the rear audio system Changing the DVD language Select “DVD Language”. Select the language you want to read, and press to input it. Select “Others” if you cannot find the language you want to read. Enter the appropriate 4-digit lan- guage code.
Page 343 3-3. Using the rear audio system Setting viewer restriction levels Setting a password allows the viewer restriction to be effective. Select “Parental Lock”. Enter the password and press The setting cannot be changed unless the password is entered. When you forget the password, initialize the password.
Page 344 3-3. Using the rear audio system ■ Returning to the previous screen Select , and press ■ To initialize the password Press on the remote controller or unit ten times when the screen to enter the personal code is displayed. ■...
Page 345 3-3. Using the rear audio system Code Language Code Language 0721 Gujarati 1311 Macedonian 0801 Hausa 1312 Malayalam 0809 Hindi 1314 Mongolian 0818 Croatian 1315 Moldavian 1821 Hungarian 1318 Marathi 1825 Armenian 1319 Malay 0901 Interlingua 1320 Maltese 0905 Interlingue 1325 Burmese 0911...
Page 346 3-3. Using the rear audio system Code Language Code Language 1914 Shona 2014 Setswana 1915 Somali 2015 Tonga 1917 Albanian 2018 Turkish 1918 Serbian 2019 Tsonga 1919 Siswati 2020 Tatar 1920 Sesotho 2023 1921 Sundanese 2111 Ukrainian 1923 Swahili 2118 Urdu 2001 Tamil...
Page 347 3-4. Using the hands-free phone system (for cellular phone) ∗ Hands-free phone system (for cellular phone) features Vehicles with navigation system Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. Vehicles without navigation system ®...
Page 348 3-4. Using the hands-free phone system (for cellular phone) ■ Conditions under which the system will not operate ● ® If using a mobile phone that does not support Bluetooth ● If the mobile phone is switched off ● If you are outside service range ●...
Page 349 3-4. Using the hands-free phone system (for cellular phone) ■ Certification for the hands-free phone system FCC ID: HYQBTAU01A IC ID: 1551A-BTAU01A MADE IN JAPAN This device complies with Part 15 of the FCC Rules and RSS-210. Opera- tion is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 350 3-4. Using the hands-free phone system (for cellular phone) FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth, for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65.
Page 351 3-4. Using the hands-free phone system (for cellular phone) ∗ Using the hands-free phone system ■ Audio unit Displays such items as messages, names, phone numbers Lower-case characters and special characters, such as an umlaut, cannot be dis- played. Push and hold: Displays information that is too long to be displayed at one time on the screen...
Page 352 3-4. Using the hands-free phone system (for cellular phone) ■ Steering wheel telephone switches Volume The voice guidance volume cannot be adjusted by using this switch. Hands-free phone system off/ends a call/refuses a call Hands-free phone system on/starts a call Press: Voice command sys- tem on Press and hold: Voice com-...
Page 353 3-4. Using the hands-free phone system (for cellular phone) Operating the system by using a voice command By following voice guidance instructions output from the speaker, voice commands can be given to allow for operation of the hands- free phone system without checking the display or operating ■...
Page 354 3-4. Using the hands-free phone system (for cellular phone) Using the hands-free phone system for the first time Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered.
Page 355 3-4. Using the hands-free phone system (for cellular phone) Menu list of the hands-free phone system ■ Normal operation Second First menu Third menu Operation detail menu Dialing a number stored in Callback the incoming history memory Dialing a number stored in Redial the outgoing history memory Dial by...
Page 356 3-4. Using the hands-free phone system (for cellular phone) Second First menu Third menu Operation detail menu Set PIN Setting a PIN code Phonebook Locking the phone book Security Lock Phonebook Unlocking the phone book Unlock Registering a cellular phone Pair Phone to be used Changing a registered name...
Page 357 3-4. Using the hands-free phone system (for cellular phone) First menu Second menu Operation detail Phone book delete Deleting phone book data entry Phone book set Registering speed dial speed dial Phone book delete Deleting speed dial speed dial Phonebook Unlock Unlocking the phone book Phonebook Phonebook Lock...
Page 358 3-4. Using the hands-free phone system (for cellular phone) Making a phone call ■ Making a phone call ● Dialing by inputting a number “Dial by number” ● Dialing by inputting a name “Dial by name” ● Speed dialing ● Dialing a number stored in the outgoing history memory “Redial”...
Page 359 3-4. Using the hands-free phone system (for cellular phone) STEP Dial by one of the following methods: a. Press b. Press and say “Dial”. c. Select “Dial” by using Dialing by inputting a name STEP Press and say “Dial by name”. STEP Select a registered name to be input by either of the following methods:...
Page 360 3-4. Using the hands-free phone system (for cellular phone) When receiving a phone call ■ Answering the phone Press ■ Refusing the call Press Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the follow- ing methods: a.
Page 361 3-4. Using the hands-free phone system (for cellular phone) STEP Select the number by either of the following methods: a. Say “Previous” or “Go back” until the desired number is dis- played. b. Select the desired number by using The following operations can be performed: Dialing: Press or select “Dial”...
Page 362 3-4. Using the hands-free phone system (for cellular phone) Setting a cellular phone Registering a cellular phone in the hands-free phone system allows the system to function. The following function can be used for regis- tered cellular phones: ■ Functions and operation procedures To enter menu for each function, follow the steps below by using a voice command or ●...
Page 363 3-4. Using the hands-free phone system (for cellular phone) Selecting a cellular phone to be used STEP Select “Select Phone” by using a voice command or Pattern A STEP Select a cellular phone to be used by either of the following methods, and select “Confirm”...
Page 364 3-4. Using the hands-free phone system (for cellular phone) STEP Press or select “Record Name” by using , and say a new name. STEP Select “Confirm” by using a voice command or Listing the registered cellular phones Selecting “List Phones” by using a voice command or begins reading aloud the list of the registered cellular phones.
Page 365 3-4. Using the hands-free phone system (for cellular phone) Deleting a cellular phone STEP Select “Delete” by using a voice command or Pattern A STEP Select a cellular phone to be deleted by either of the following methods and select “Confirm” by using a voice command or a.
Page 366 3-4. Using the hands-free phone system (for cellular phone) Pattern B STEP Select a 4 to 8-digit number by using The number should be input 1 digit at a time. STEP When the entire number to be registered as a passkey has been input, press once again.
Page 367 3-4. Using the hands-free phone system (for cellular phone) Security and system setup To enter the menu of each setting, follow the steps below: ■ Security setting items and operation procedure ● Setting or changing the PIN (Personal Identification Number) 1.
Page 368 3-4. Using the hands-free phone system (for cellular phone) STEP Enter the registered PIN by using a voice command or STEP Enter a new PIN by using a voice command or When using , input the code 1 digit at a time. Locking or unlocking the phone book STEP Select “Phonebook lock (Phbk Lock)”...
Page 369 3-4. Using the hands-free phone system (for cellular phone) Initialization STEP Select “Initialize” and then “Confirm” by using STEP Select “Confirm” by using again. ■ Initialization ● The following data in the system can be initialized: • Phone book • Outgoing and incoming history •...
Page 370 3-4. Using the hands-free phone system (for cellular phone) Using the phone book To enter the menu of each setting, follow the steps below: ● Adding a new phone number 1. “Phonebook” → 2. “Add Entry” ● Setting speed dial 1.
Page 371 3-4. Using the hands-free phone system (for cellular phone) STEP Use one of the following methods to input a telephone num- ber: Inputting a telephone number by using a voice command STEP2-1 Select “By Voice” by using a voice command or STEP2-2 Press , say the desired number, and select “Confirm”...
Page 372 3-4. Using the hands-free phone system (for cellular phone) Inputting a phone number by using STEP2-1 Select “Manual Input” by using STEP2-2 Input a phone number by using , and press once again. Input the phone number 1 digit at a time. Selecting a phone number from outgoing or incoming history STEP2-1 Select “Call History”...
Page 373 3-4. Using the hands-free phone system (for cellular phone) STEP Select the name to be registered by either of the following methods, and select “Confirm” by using a voice command or a. Press and say the desired name. b. Select “Record Name” by using , and say the desired name.
Page 374 3-4. Using the hands-free phone system (for cellular phone) STEP Select the desired preset button, and register the data into speed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” by using a voice command or b.
Page 375 3-4. Using the hands-free phone system (for cellular phone) Deleting registered data STEP Select “Delete Entry” by using a voice command or Pattern A STEP Select data to be deleted by either of the following methods, and select “Confirm” by using a voice command or a.
Page 376 3-4. Using the hands-free phone system (for cellular phone) Listing the registered data Selecting “List names” by using a voice command begins reading the list of the registered data. When listing is complete, the system returns to “Phonebook”. Pressing while a data is being read aloud selects the data, and the following function will be available.
Page 377 3-5. Using the interior lights Interior lights list Your Toyota is equipped with the illuminated entry system to assist in entering the vehicle. Owing to the function of the system, the lights shown in the following illustration automatically turn on/off...
Page 378 3-5. Using the interior lights Personal/interior light main switch and personal/interior lights Personal/interior light main switch “OFF” The personal/interior lights and interior light can be individually turned on or off. Door position The personal/interior lights and interior light come on when a door or the glass hatch (if equipped) is opened.
Page 379 20 minutes. ■ Customization that can be configured at Toyota dealer Settings (e.g. The time elapsed before lights turn off) can be changed. (Customizable features →P. 582)
Page 380 3-6. Using the storage features List of storage features Auxiliary boxes Overhead console Glove box Bottle holders Cup holders Side table Console box Auxiliary box & cup holder...
Page 381 3-6. Using the storage features Glove box Glove box Unlock with the master key (vehicles without smart key system) or mechanical key (vehicles with smart key sys- tem) Lock with the master key (vehicles without smart key system) or mechanical key (vehicles with smart key sys- tem) Open (pull lever)
Page 382 3-6. Using the storage features Console box Console box Upper Pull up the knob to release the lock. Lift the lid. Lower Push down the lever. CAUTION ■ Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
Page 383 3-6. Using the storage features Overhead console Overhead console The overhead console is useful for temporarily storing sunglasses and similar small items. Press in the lid. CAUTION ■ Items that should not be left in the overhead console Do not leave glasses or lighters in the console. If the interior of the vehicle becomes hot, lighters may explode and glasses may warp or become cracked.
Page 384 3-6. Using the storage features Cup holders Cup holders Front (type A) Removing the adapters changes the size. (→P. 381) Front (type B) Lift the lid. Console box Pull out the cup holder.
Page 385 3-6. Using the storage features Cup holders Side table Install the side table before using the cup holder. (→P. 386) Removing the adapters changes the size. (→P. 381) Rear (vehicles without third seat) Rear (vehicles with third seat) Removing the adapters changes the size.
Page 386 3-6. Using the storage features Cup holders ■ Adjusting size of the cup holder (front [type A], front [type B], side table, rear [vehicles with third seats]) Front (type A) Remove the adapter. Front (type B) Remove the separator. Side table Remove the adapter.
Page 387 3-6. Using the storage features Cup holders CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 388 3-6. Using the storage features Bottle holders Bottle holders Front Rear CAUTION ■ Items unsuitable for the bottle holder Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 389 3-6. Using the storage features Auxiliary boxes Auxiliary boxes Type A Pull up the lever. Type B Lift the lid. Remove the separator to use the box. (→P. 381) Type C (if equipped) Lift the lid.
Page 390 3-6. Using the storage features Auxiliary boxes Type D Lift the lid. ■ Auxiliary box (type D) Install the side table. (→P. 386) CAUTION ■ Caution while driving Keep the auxiliary boxes closed. Injuries may result in the event of an accident or sudden braking.
Page 391 3-6. Using the storage features Side table Side table ■ Installing the side table Take out the side table from the STEP console box. STEP Remove the second center seat. (→P. 87) Engage the front pins of the STEP side table with the hooks. Push down on the side table to engage the rear pin locks.
Page 392 3-6. Using the storage features Side table Pull the lock release lever to STEP remove the side table. Stow the side table in the con- STEP sole box. Push down on the end to engage STEP the pins in the holes and close the console box door.
Page 393 3-7. Other interior features Sun visors Forward position Flip down. Side position Flip down, unhook, and swing to the side. Side extender Place in side position then slide backwards.
Page 394 3-7. Other interior features Vanity mirrors Slide the cover. The light turns on when the cover is opened. (vehicles with vanity mirror light) NOTICE ■ To prevent the battery from being discharged Do not leave the vanity lights on for extended periods while the engine is stopped.
Page 395 3-7. Other interior features Clock (vehicles without multi-information display) Adjusts the hours. Adjusts the minutes. ■ The clock is displayed when The engine switch is in the “ACC” or “ON” position.
Page 396 3-7. Other interior features Conversation mirror Press in the lid. Push the lid back up half way. ■ To use the overhead console from the conversation mirror state Fully close the lid, then open it again. (→P. 378)
Page 397 3-7. Other interior features Power outlets The power outlet can be used for a following component. 12 V: Accessories that run on less than 10 A. 115 VAC: Accessories that use less than 100 W. ■ 12 V Type A* Type B*...
Page 398 3-7. Other interior features Type C Type D ■ 115 VAC Main switch To use the power outlet, turn on the main switch. Power outlet socket : Vehicles with seat heater : Vehicles without seat heater : Vehicles with rear entertainment system...
Page 399 3-7. Other interior features ■ The power outlet can be used when 12 V Vehicles without smart key system: The engine switch is in the “ACC” or “ON” position. Vehicles with smart key system: The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.
Page 400 3-7. Other interior features NOTICE ■ To avoid damaging the power outlet Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit. ■...
Page 401 3-7. Other interior features ∗ Seat heaters Pops the knob out Driver's seat The indicator light comes on. Adjusts the seat tempera- ture The further you turn the knob Front passenger's seat clockwise, the warmer the seat becomes. ■ The seat heaters can be used when Vehicles without smart key system The engine switch is in the “ON”...
Page 402 3-7. Other interior features CAUTION ■ Burns ● Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled •...
Page 403 3-7. Other interior features Armrests Pull the armrest down for use. NOTICE ■ To prevent damage to the armrest Do not place too much strain on the armrest.
Page 404 3-7. Other interior features Floor mat Securely place a mat that matches the size of the space on the car- pet. Secure the driver's floor mat using the hooks provided. CAUTION ■ When inserting the floor mat Observe the following precautions. Failure to do so may result in the floor mat slipping and interfering with the movement of the pedals during driving, resulting in an accident.
Page 405 3-7. Other interior features Luggage compartment features ■ Cargo hooks Cargo hooks are provided for securing loose items. ■ Shopping bag hooks ■ Auxiliary box Lift the center deck board.
Page 406 3-7. Other interior features ■ Separating luggage compartment The center deck board can be used to separate the luggage compartment. Remove center deck board and insert it upright into the groove. The board cannot be inserted when the luggage cover is stowed.
Page 407 3-7. Other interior features ■ Luggage cover (vehicles with luggage cover) Hang the hooks on the hook STEP brackets on the second seat seatback. Vehicles with the third seat: When using the luggage cover, the third seat must be fold down.
Page 408 3-7. Other interior features ■ Removing the luggage cover (vehicles with luggage cover) The luggage cover can be removed by following the procedure below. Detach the hooks. Push in the left side of the luggage cover while keeping hold of the right side.
Page 409 3-7. Other interior features ■ Stowing the luggage cover (vehicles with luggage cover) Remove the side deck boards and open STEP the center deck board. Fold the flaps on top of the luggage cover STEP with the hooks rolled inside. Place the left end of the luggage cover in STEP the recess on the left-hand side and then...
Page 410 3-7. Other interior features NOTICE ■ Shopping bag hook weight capacity Do not hang any object heavier than 4 lb. (2 kg) on shopping bag hooks. ■ While driving Do not drive with the luggage cover standing upright in the grooves as the luggage cover may fall down.
Page 411 3-7. Other interior features ∗ Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, and security systems, and other devices. ® The garage door opener (HomeLink Universal Transceiver) is manufac- ®...
Page 412 3-7. Other interior features Press and hold down one of the STEP ® buttons on the HomeLink the button on the transmitter. When the indicator light on the ® HomeLink changes from a slow to a rapid flash after 20 seconds, you can release both buttons.
Page 413 3-7. Other interior features ■ Programming a Rolling Code system (for U.S.A. owners) If your device is Rolling Code equipped, follow the steps under the ® heading “Programming the HomeLink ” before proceeding with the steps listed below. STEP Locate the training button on the ceiling mounted garage door opener motor.
Page 414 ® the remaining HomeLink buttons. ■ Programming other devices To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance. ■ Reprogramming a button ® The individual HomeLink buttons cannot be erased but can be reprogrammed.
Page 415 3-7. Other interior features ■ Before programming ● Install a new battery in the transmitter. ● The battery side of the transmitter must be pointed away from the ® HomeLink ■ Certification for the garage door opener This device complies with Part 15 of the FCC Rules and with RSS-210 of the IC Rules.
Page 416 3-7. Other interior features ∗ Compass The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. ■ Operation To turn the compass on or off, press the switch. ■ Displays and directions Display Direction North Northeast...
Page 417 3-7. Other interior features Calibrating the compass The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the compass will deviate.
Page 418 3-7. Other interior features ■ Circling calibration When C appears on the display, drive the vehicle at 5 mph (8 km/h) or less in a circle until a direction is displayed. If there is not enough space to drive in a circle, drive around the block until the direction is dis- played.
Page 419 3-7. Other interior features NOTICE ■ To avoid the compass malfunctions Do not place magnets or any metal objects near the inside rear view mirror. Doing this may cause a malfunction of the compass sensor. ■ To ensure normal operation of the compass ●...
Page 420 4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition. ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 421 4-1. Maintenance and care ■ Aluminum wheels Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint. ■...
Page 422 Do not use organic cleaners such as benzene or gasoline. ■ If the windshield washer nozzle become blocked Contact your Toyota dealer. Do not try to clear it with a pin or other object. This may damage the nozzle. ■...
Page 423 4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
Page 424 (if equipped). ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle's interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available.
Page 425 4-1. Maintenance and care NOTICE ■ Cleaning detergents Do not use organic substances such as benzene or gasoline, acidic or alka- line solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces. ■...
Page 426 It is recommended that genuine Toyota parts be used for repair to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 427 4-2. Maintenance ■ Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle.
Page 428 “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items...
Page 429 4-2. Maintenance Vehicle interior Items Check points • Moves smoothly (without uneven Accelerator pedal pedal effort or catching)? • Can the vehicle be held securely Automatic transmission “Park” on an incline with the shift lever in mechanism • Moves smoothly? •...
Page 430 4-2. Maintenance Vehicle exterior Items Check points Door • Operate smoothly? Engine hood • The lock system works properly? • Is there any leakage after park- Fluid leaks ing? • Inflation pressure is correct? • Tire surfaces not worn or dam- aged? Tire •...
Page 431 If the malfunction indicator lamp comes on The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. ■...
Page 432 Brake fluid level (→P. 448) • Rag or paper towel • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology.
Page 433 4-3. Do-it-yourself maintenance Items Parts and tools • Fuse with same amperage rating Fuses (→P. 475) as original Radiator and condenser ⎯ (→P. 447) • Tire pressure gauge Tire inflation pressure (→P. 463) • Compressed air source • Water washer fluid containing Washer fluid (→P.
Page 434 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothing, and tools away from the moving fan and engine drive belt.
Page 435 4-3. Do-it-yourself maintenance CAUTION ■ Safety glasses Wear safety glasses to prevent flying or falling material, fluid spray, etc. from getting in the eyes. NOTICE ■ If you remove the air cleaner filter Driving with the air cleaner filter removed may cause excessive engine wear due to dirt in the air.
Page 436 4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. STEP The hood will pop up slightly. Lift the auxiliary catch lever STEP and lift the hood. Hold the hood open by insert- STEP ing the supporting rod into either of the slots.
Page 437 4-3. Do-it-yourself maintenance CAUTION ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■...
Page 438 4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury. Front Rear (2WD models) Rear (4WD models)
Page 439 4-3. Do-it-yourself maintenance Removing the front jack point cover (3.5 L V6 (2GR-FE) engine) Before jacking, remove the jack point cover. Turn the bolts counterclockwise STEP and remove them. Remove the cover. STEP...
Page 440 4-3. Do-it-yourself maintenance CAUTION ■ When raising your vehicle Make sure to observe the following to reduce the possibility of death or seri- ous injury. ● Lift up the vehicle using a floor jack such as the one shown in the illustra- tion.
Page 441 4-3. Do-it-yourself maintenance Engine compartment 2.7 L 4-cylinder (1AR-FE) engine Washer fluid tank (→P. 452) Battery (→P. 449) Engine oil filler cap Brake fluid reservoir (→P. 441) (→P. 448) Engine oil level dipstick Fuse boxes (→P. 475) (→P. 440) Electric cooling fans Engine coolant reservoir Condenser (→P.
Page 442 4-3. Do-it-yourself maintenance 3.5 L V6 (2GR-FE) engine Washer fluid tank (→P. 452) Battery (→P. 449) Engine oil filler cap Brake fluid reservoir (→P. 441) (→P. 448) Engine oil level dipstick Fuse boxes (→P. 475) (→P. 440) Electric cooling fans Engine coolant reservoir Condenser (→P.
Page 443 4-3. Do-it-yourself maintenance Engine compartment cover ■ Removing the engine compartment cover ■ Installing the clips...
Page 444 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil STEP Park the vehicle on level ground. After turning off the engine, wait more than five minutes for the oil to drain back into the bottom of the engine.
Page 445 4-3. Do-it-yourself maintenance 3.5 L V6 (2GR-FE) engine Full ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 446 4-3. Do-it-yourself maintenance ■ Recommended viscosity (2.7 L 4-cylinder (1AR-FE) engine) SAE 5W-20 or 0W-20 engine oil may be used. However, SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. Outside temperature ■ Recommended viscosity (3.5 L V6 (2GR-FE) engine) Without towing package SAE 5W-20 is the best choice for...
Page 447 1000 km) ● If your vehicle consume more than 1.1 qt. (1.0 L, 0.9 Imp. qt.) every 600 miles (1000 km), contact your Toyota dealer. ■ Changing the engine oil (U.S.A. only) To reset the oil change system, follow the procedure below:...
Page 448 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
Page 449 4-3. Do-it-yourself maintenance Engine coolant The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir when the engine is cold. Reservoir cap “FULL” “LOW” If the level is on or below the “LOW” line, add coolant up to the “FULL”...
Page 450 If the coolant level drops within a short time after replenishing Visually check the radiator, hoses, engine coolant filler cap, radiator cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer pressure test the cap and check for leaks in the cooling system. ■...
Page 451 Radiator and condenser Check the radiator and condenser, and clear any foreign objects. If either of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your Toyota dealer. CAUTION ■...
Page 452 4-3. Do-it-yourself maintenance Brake fluid ■ Checking fluid level The brake fluid level should be between the “MAX” and “MIN” lines on the tank. Make sure to check the fluid type and prepare the necessary items. ■ Adding fluid Fluid type SAE J1703 or FMVSS No.116 DOT 3 Items Clean funnel...
Page 453 Hold-down clamp ■ Checking battery condition Check the battery condition using the indicator color. Red: Not working properly, have the battery checked by your Toyota dealer. Blue: Good condition White: Charging is necessary. Have the vehicle inspected by your Toyota dealer.
Page 454 4-3. Do-it-yourself maintenance ■ Before recharging When recharging, the battery produces hydrogen gas which is flammable and explosive. Therefore, before recharging: ● If recharging with the battery installed on the vehicle, be sure to discon- nect the ground cable. ● Make sure the power switch on the charger is off when connecting and disconnecting the charger cables to the battery.
Page 455 4-3. Do-it-yourself maintenance CAUTION ■ How to recharge the battery Only perform a slow charge (5 A or less). The battery may explode if charged at a quicker rate. ■ Emergency measures regarding electrolyte ● If electrolyte gets in your eyes Flush your eyes with clean water for at least 15 minutes and get immedi- ate medical attention.
Page 456 4-3. Do-it-yourself maintenance Washer fluid Add washer fluid in the following situations. ● Any washer does not work. ● The low washer fluid warning light comes on (vehicles with- out multi-information display). ● The warning message appears on the multi-informa- tion display (vehicles with multi-information display).
Page 457 Tire rotation Vehicles without compact spare tire Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recom- mends that tire rotation is Front carried out at the same inter- val as tire inspection.
Page 458 ■ The tire pressure warning system Your Toyota is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. (→P. 513,...
Page 459 Have tire pressure warning valve and transmitter ID codes registered by your Toyota dealer. (→P. 457) Initializing the tire pressure warning system ■...
Page 460 4-3. Do-it-yourself maintenance Push and hold the tire pressure STEP warning reset switch until the tire pressure warning light blinks slowly 3 times. Vehicles without smart key system STEP Wait for a few minutes with the engine switch in the “ON” posi- tion, and then turn the engine switch to the “LOCK”...
Page 461 ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. ■ Replacing tires and wheels If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly.
Page 462 4-3. Do-it-yourself maintenance ■ Maximum load of tire Check that the maximum load of the replaced tire is greater than 1/2 of the Gross Axle Weight Ratings (GAWR) of either the front axle or the rear axle, whichever is greater. As for the maximum load of the tire, see the load limit at maximum cold tire inflation pressure mentioned on the sidewall of the tire, and as for the Gross Axle Weight Ratings (GAWR), see the Certification Label.
Page 463 Initialization can be completed in a few minutes. However, in the follow- ing cases, the settings have not been recorded and the system will not operate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. ●...
Page 464 4-3. Do-it-yourself maintenance ■ Tire pressure warning system certification For vehicles sold in the U.S.A. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 465 ● Do not mix tires of different makes, models, tread patterns or tread- wear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix radial, bias-belted, or bias-ply tires. ● Do not mix summer, all season and winter tires.
Page 466 Repairing or replacing tires, wheels and tire pressure warning valves and transmitters When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled correctly. ■...
Page 467 4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis- played on the tire and loading information label. (→P. 570)
Page 468 4-3. Do-it-yourself maintenance ■ Inspection and adjustment procedure Tire valve Tire pressure gauge STEP Remove the tire valve cap. STEP Press the tip of the tire pressure gauge onto the tire valve. STEP Read the pressure using the graduations of the gauge. STEP If the tire inflation pressure is not within the recommended levels, adjust the pressure.
Page 469 Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent refilling, have it checked by your Toyota dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
Page 470 4-3. Do-it-yourself maintenance CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury. ● Excessive wear ● Uneven wear ●...
Page 471 ● Bent wheels that have been straightened ■ Aluminum wheel precautions ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
Page 472 Because tire repair or replacement may affect the tire pressure warning valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 473 4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. ■ Removal method STEP Vehicles without smart key system: Turn the engine switch OFF. Vehicles with smart key system: Turn the “ENGINE START STOP”...
Page 474 4-3. Do-it-yourself maintenance Remove the filter cover. STEP ■ Replacement method Remove the air conditioning filter and replace it with a new one. The “↑UP” marks shown on the filter should be pointing up. ■ Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule.
Page 475 4-3. Do-it-yourself maintenance NOTICE ■ When using the air conditioning system Make sure that a filter is always installed. Using the air conditioning system without a filter may cause damage to the system.
Page 476 4-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver (To prevent damage to the key, cover the tip of the screwdriver with a rag.) ●...
Page 477 4-3. Do-it-yourself maintenance ■ Replacing the battery (vehicles with smart key system) Take out the mechanical key. STEP Remove the cover. STEP Remove the depleted battery. STEP Insert a new battery with the “+” terminal facing up.
Page 478 Use a CR2032 (vehicles without smart key system) or CR1632 (vehicles with smart key system) lithium battery ● Batteries can be purchased at your Toyota dealer, jewelers, or camera stores. ● Replace only with the same or equivalent type recommended by your Toyota dealer.
Page 479 4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. STEP Vehicles without smart key system: Turn the engine switch OFF.
Page 480 4-3. Do-it-yourself maintenance Under the instrument panel Remove the lid. STEP After a system failure, see “Fuse layout and amperage rat- ings” (→P. 478) for details about which fuse to check. Remove the fuse with the pull- STEP out tool. STEP Check if the fuse has blown.
Page 481 Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. Type C Normal fuse Blown fuse Contact your Toyota dealer. Type D Normal fuse Blown fuse Contact your Toyota dealer.
Page 482 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings ■ Engine compartment Type A (fuse block on the back of the cover) Type A (fuse block) Fuse Ampere Circuit SPARE 7.5 A Spare fuse SPARE 15 A Spare fuse SPARE 25 A Spare fuse...
Page 483 4-3. Do-it-yourself maintenance Fuse Ampere Circuit DEF RLY 10 A Rear window defogger MIR HTR 20 A MIR HTR (15 A) P/OUT 20 A Power outlet DOOR 1 25 A Multiplex communication system Multiport fuel injection system/ EFI NO.2 10 A sequential multiport fuel injection system Multiport fuel injection system/...
Page 484 4-3. Do-it-yourself maintenance Fuse Ampere Circuit 10 A Rear seat entertainment system RADIO1 15 A Audio system Steering sensor, gauges and meters, clock, air conditioning sys- tem, main body ECU, wireless ECU-B 10 A remote control, smart key system, power back door, on-board diagno- sis system Vanity lights, personal lights, inte- rior light, gauges and meters,...
Page 485 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Multiport fuel injection system/ sequential multiport fuel injection ETCS 10 A system, electronic throttle control system 20 A Air fuel ratio sensor S-HORN 7.5 A Horn Type B (if equipped) Fuse Ampere Circuit INV-W/P 15 A No circuit IGCT NO.2...
Page 486 4-3. Do-it-yourself maintenance ■ Under the instrument panel Front side of the fuse block Fuse block Fuse Ampere Circuit P/SEAT 30 A Power seat POWER 30 A Power windows RR DOOR RH 25 A Power windows RR DOOR LH 25 A Power windows FR FOG 15 A...
Page 487 4-3. Do-it-yourself maintenance Fuse Ampere Circuit RR FOG 7.5 A No circuit A/C NO.1 10 A Air conditioning system FUEL OPN 7.5 A No circuit S/ROOF 30 A Electric moon roof Parking lights, tail lights, license TAIL 15 A plate lights, front fog lights, trailer lights Glove box light, emergency flash- ers, audio system, outside rear...
Page 488 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Audio system, outside rear view mirror defoggers, back-up lights, charging system, emergency flash- GAUGE NO.1 10 A ers, traction control system, instru- ment panel light control dial, windshield wiper deicer FR WIP 30 A Windshield wipers and washer RR WIP 15 A...
Page 489 Never use a fuse of a higher amperage rating than indicated, or use any other object in place of a fuse. ● Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix. This can cause extensive damage or even fire.
Page 490 You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 491 4-3. Do-it-yourself maintenance ■ Rear bulb locations Back-up lights Stop/tail and rear side marker lights License plate lights Rear turn signal lights Replacing light bulbs ■ Headlights Unplug the connector. STEP Remove the rubber cover. STEP...
Page 492 4-3. Do-it-yourself maintenance Release bulb retaining STEP spring. Remove the bulb. STEP...
Page 493 4-3. Do-it-yourself maintenance ■ Front fog lights (if equipped) STEP Remove the fender liner bolts and clips as follows. Left side...
Page 494 4-3. Do-it-yourself maintenance Right side Remove the fender liner. STEP Turn the bulb base counterclock- STEP wise.
Page 495 4-3. Do-it-yourself maintenance Unplug connector while STEP depressing the lock release. ■ Parking and front side marker lights Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP...
Page 496 4-3. Do-it-yourself maintenance ■ Front turn signal lights Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP...
Page 497 4-3. Do-it-yourself maintenance ■ Back-up lights, stop/tail and rear side marker lights Left side Open the back door and remove STEP the cover. To protect the cover, place a rag between the flathead screwdriver and cover as shown in the illus- trations.
Page 498 4-3. Do-it-yourself maintenance Remove the light bulb. STEP Back-up light Rear turn signal light Stop/tail and rear side marker light ■ License plate lights Remove the screw and remove STEP the unit. Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP...
Page 499 ■ LED high mounted stoplight The high mounted stoplight consists of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. ■ Installing the fender liner clips Insert the clips.
Page 500 4-3. Do-it-yourself maintenance CAUTION ■ Replacing light bulbs ● Turn off the headlights. Do not attempt to replace the bulb immediately after turning off the headlights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. Hold the bulb by the plastic or metal portion.
Page 501 5-1. Essential information Emergency flashers Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Vehicles without navigation system Press the switch to flash all the turn signal lights. To turn them off, press the switch once again.
Page 502 If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.
Page 503 5-1. Essential information Emergency towing If a tow truck is not available, in an emergency your vehicle may be temporarily towed using a cable or chain secured to the emergency towing eyelet(s). This should only be attempted on hard surfaced roads for short distances at low speeds.
Page 504 5-1. Essential information CAUTION ■ Caution while towing ● Use extreme caution when towing the vehicle. Avoid sudden starts or erratic driving maneuvers which place excessive stress on the emergency towing eyelets and the cables or chains. ● If the engine is not running, the power assist for the brakes and steering will not function, making steering and braking more difficult.
Page 505 5-1. Essential information Tighten down the towing eyelet STEP securely using a wheel nut wrench. ■ Location of the emergency towing eyelet →P. 522 CAUTION ■ Installing towing eyelet to the vehicle Make sure that towing eyelet is installed securely. If not securely installed, towing eyelet may come loose during towing.
Page 506 5-1. Essential information Towing with a sling-type truck NOTICE ■ To prevent body damage Do not tow with a sling-type truck, either from the front or rear. Towing with a wheel lift-type truck From front (2WD models) Release the parking brake.
Page 507 5-1. Essential information From front (4WD models) Use a towing dolly under the rear wheels. NOTICE ■ To prevent damaging the vehicle When raising the vehicle, ensure adequate ground clearance for towing at the opposite end of the raised vehicle. Without adequate clearance, the vehicle could be damaged while being towed.
Page 508 5-1. Essential information Using a flat bed truck If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°. Do not overly tighten the tie downs or the vehicle may be damaged.
Page 509 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 510 5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or an air- bag inflates upon collision, the fuel pump shut off system stops sup- plying fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 511 5-1. Essential information Event data recorder Your vehicle has computers that monitor and control certain aspects of your vehicle. These computers assist in driving and maintaining optimal vehicle performance. Besides storing data useful for troubleshooting, there is an event data recorder (EDR) that records data in a crash or a near car crash event.
Page 512 5-1. Essential information Disclosure of the data Toyota will not disclose the data recorded in an EDR to a third party except when: ● An agreement from the vehicle's owner (or the leasing company for a leased vehicle) is obtained ●...
Page 513 Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake sys- tem. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Brake system warning light (warning buzzer)* •...
Page 514 Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning light Warning light/Details Malfunction indicator lamp Indicates a malfunction in: (U.S.A.)
Page 515 Is the fuel tank cap loose? If it is, tighten it securely. The light will go off after taking several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible.
Page 516 Stop the vehicle in a safe light (vehicles without place and shift the shift multi-information display) lever to P. Indicates that the auto- If the light does not go off, matic transmission fluid contact your Toyota dealer. temperature is too high.
Page 517 Low tire inflation pressure pressure. When the light comes on after blinking for 1 minute: Have the system checked Malfunction in the tire by your Toyota dealer. pressure warning system Master warning light (vehicles with multi-infor- mation display) A buzzer sounds and the →P.
Page 518 5-2. Steps to take in an emergency : Open door warning buzzer: The open door warning buzzer sounds to alert one or more of the doors is not fully closed (with the vehicle having reached a speed of 3 mph [5 km/h]). : Driver's and front passenger’s seat belt reminders: The driver’s and front passenger’s seat belt reminders sound to alert the driver and front passenger that his or her seat belt is not fastened.
Page 519 5-2. Steps to take in an emergency ■ When the tire pressure warning light comes on Check the tire inflation pressure and adjust to the appropriate level. Pushing the tire pressure warning reset switch does not turn off the tire pressure warning light.
Page 520 If there is a lot of snow or ice on the vehicle, in particular around the wheels or wheel housings. ● If non-genuine Toyota wheels are used. (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.) ●...
Page 521 Toyota dealer. Vehicles with smart key system If the tire pressure warning light comes on after blinking for 1 minute fre- quently when the “ENGINE START STOP” switch is turned to IGNITION ON mode, have it checked by your Toyota dealer.
Page 522 Check the tires. If the tire is flat, change to the spare tire and have the flat tire repaired by the nearest Toyota dealer. ● Avoid abrupt maneuvering and braking. If the vehicle tires deteriorate, you could lose control of the steering wheel or the brakes.
Page 523 5-2. Steps to take in an emergency CAUTION Please note that the TPMS (tire pressure warning system) is not a sub- stitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale (tire pressure warning light).
Page 524 ■ Warning buzzer A buzzer may sound when a warning message is shown on the multi-information display. ■ If the warning message is shown again after its correction procedure has been performed Contact your Toyota dealer as soon as possible.
Page 525 5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ●...
Page 526 5-2. Steps to take in an emergency Taking out the jack Remove the right side deck STEP board. Unhook the tightening strap and STEP remove the pad. After storing the jack, make sure it is securely held by the tightening strap. Loosen STEP Tighten...
Page 527 5-2. Steps to take in an emergency Taking out the spare tire Open the center deck board and STEP remove the cover. Remove the cover. STEP If it is difficult to remove the cover, you can use the key. Attach the adapter socket (for STEP removing a spare tire) on the spare tire clamp bolt.
Page 528 5-2. Steps to take in an emergency Assemble the jack handle and STEP tighten the screw. Connect the jack handle and the STEP adapter socket. Turn the jack handle. The tire will be lowered com- pletely to the ground. Pull out the spare tire and stand STEP it against the bumper.
Page 529 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. STEP STEP Wheel Flat tire chock positions Behind the Left- rear right- hand hand side side tire Front Behind the Right- rear left- hand hand side side tire In front of...
Page 530 5-2. Steps to take in an emergency Turn the tire jack portion “A” by STEP hand until the notch of the jack is in contact with the jack point. Raise the vehicle until the tire is STEP slightly raised off the ground. Remove all the wheel nuts and STEP the tire.
Page 531 5-2. Steps to take in an emergency Installing the tire Remove any dirt or foreign mat- STEP ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle.
Page 532 5-2. Steps to take in an emergency Lower the vehicle. STEP Firmly tighten each nut two or STEP three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) Stowing the flat tire, jack and all tools Remove the center wheel orna- STEP ment...
Page 533 5-2. Steps to take in an emergency ■ The compact spare tire ● The compact spare tire is identified by the label “TEMPORARY USE ONLY” on the tire sidewall. Use the compact spare tire temporarily only in an emergency. ● Make sure to check the tire inflation pressure of the compact spare tire.
Page 534 5-2. Steps to take in an emergency CAUTION ■ Using the tire jack Improper use of the tire jack may lead to death or serious injuries due to the vehicle suddenly falling off the jack. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains.
Page 535 5-2. Steps to take in an emergency CAUTION ■ Replacing a flat tire Observe the following precautions to reduce the risk of death or serious injury. ● Never use oil or grease on the wheel bolts or wheel nuts. Oil and grease may cause the wheel nuts to be excessively tightened, leading to bolt or disc wheel damage.
Page 536 5-2. Steps to take in an emergency CAUTION ■ When the compact spare tire is attached The vehicle speed may not be correctly detected, and the following sys- tems may not operate correctly: ● ABS & Brake assist ● Enhanced VSC ●...
Page 537 ■ When replacing the tires When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled correctly. ■...
Page 538 5-2. Steps to take in an emergency If the engine will not start If the engine still does not start after following the correct starting procedure (→P. 173, 177) or releasing the steering lock (→P. 175, 178), confirm the following points. ■...
Page 539 ● There may be a malfunction in the steering lock system (vehi- cles with smart key system). Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function (vehicles with smart key system) When the engine does not start, the following steps can be used as an interim measure to start the engine if the “ENGINE START STOP”...
Page 540 (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 541 If you lose your keys/wireless remote control transmitter ■ Keys New genuine keys can be made by your Toyota dealer. For vehicles with the smart key system, bring the other key and the key number stamped on the key number plate.
Page 542 Changing “ENGINE START STOP” switch modes and starting the engine STEP Shift the shift lever to P and apply the brakes. Touch the Toyota emblem side of STEP electronic “ENGINE START STOP” switch. If any of the doors is opened and...
Page 543 5 seconds after the buzzer sounds, keeping the brake pedal depressed. In the event that the “ENGINE START STOP” switch still cannot be operated, contact your Toyota dealer. ■ Stopping the engine Shift the shift lever to P and press the “ENGINE START STOP” switch as you normally do when stopping the engine.
Page 544 You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your Toyota following the steps below. STEP Connect the jumper cables.
Page 545 5-2. Steps to take in an emergency 3.5 L V6 (2GR-FE) engine Positive (+) battery terminal on your vehicle Positive (+) battery terminal on the second vehicle Negative (-) battery terminal on the second vehicle Connect the jumper cable to ground on your vehicle as shown in the illustration.
Page 546 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order in which they were con- nected. Once the engine starts, have the vehicle checked at your Toyota dealer as soon as possible. ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting.
Page 547 5-2. Steps to take in an emergency CAUTION ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the battery. ● Make sure the jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any part other than the intended termi- nal.
Page 548 Wait until the temperature of the engine (shown on the instrument cluster) begins to fall and then stop the engine. If the fan is not operating: Stop the engine and call your Toyota dealer. After the engine has cooled STEP down sufficiently, check the...
Page 549 Water can be used in an emer- gency if engine coolant is (→ unavailable. P. 558 Have the vehicle checked at the nearest Toyota dealer as soon as possible. ■ Overheating If you observe the following, your vehicle may be overheating.
Page 550 5-2. Steps to take in an emergency NOTICE ■ When adding engine coolant Wait until the engine has cooled down before adding engine coolant. When adding coolant, do so slowly. Adding cool coolant to a hot engine too quickly can cause damage to the engine.
Page 551 5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. STEP Stop the engine. Set the parking brake and put the shift lever in P.
Page 552 5-2. Steps to take in an emergency NOTICE ■ To avoid damaging the transmission and other components ● Avoid spinning the wheels and do not rev the engine. ● If the vehicle remains stuck after trying these procedures, the vehicle may require towing to be freed.
Page 553 5-2. Steps to take in an emergency...
Page 554 6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights Overall length 188.4 in. (4785 mm) Overall width 75.2 in. (1910 mm) Without roof rails 68.1 in. (1730 mm) Overall height With roof rails 69.3 in. (1760 mm) Wheelbase 109.8 in.
Page 555 Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped under the right-hand front seat.
Page 556 6-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown. 2.7 L 4-cylinder (1AR-FE) engine 3.5 L V6 (2GR-FE) engine...
Page 557 6-1. Specifications Engine Model 1AR-FE 2GR-FE 4-cylinder in line, 6-cylinder V type, Type 4-cycle, gasoline 4-cycle, gasoline 3.54 × 4.13 in. 3.70 × 3.27 in. Bore and stroke (90.0 × 105.0 mm) (94.0 × 83.0 mm) Displacement 163.0 cu.in. (2672 cm 210.9 cu.in.
Page 558 6-1. Specifications Lubrication system Oil capacity Drain and refill (Refer- ence) Without filter 2.7 L 4-cylinder (1AR-FE) engine 4.2 qt. (4.0 L, 3.5 Imp. qt.) 3.5 L V6 (2GR-FE) engine 6.0 qt. (5.7 L, 5.0 Imp. qt.) With filter 2.7 L 4-cylinder (1AR-FE) engine 4.7 qt.
Page 559 6-1. Specifications Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the grade and vis- cosity shown below. Recommended oil viscosity (2.7 L 4-cylinder (1AR-FE) engine) Outside temperature Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the grade and vis- cosity shown below.
Page 560 11.6 qt. (11.0 L, 9.7 Imp. qt.) 12.4 qt. (11.7 L, 10.3 Imp. qt.)* Use either of the following. • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based Coolant type non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
Page 561 6-1. Specifications Ignition system Spark plug Make 2.7 L 4-cylinder (1AR-FE) engine DENSO, SK16HR11 3.5 L V6 (2GR-FE) engine DENSO FK20HR11 0.043 in. (1.1 mm) NOTICE ■ Iridium-tipped spark plugs Use only iridium-tipped spark plugs. Do not adjust gap when tuning engine. Electrical system Battery 12.6 ⎯...
Page 562 NOTICE ■ Automatic transmission fluid type Using automatic transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the automatic transmis- sion of your vehicle.
Page 563 6-1. Specifications Transfer (4WD models) Oil capacity 1.0 qt. (0.9 L, 0.8 Imp. qt.) Oil type Hypoid gear oil API GL-5 Above 0°F (-18°C): SAE 90 Recommended oil viscosity Below 0°F (-18°C): SAE 80W or 80W-90 Brakes Pedal clearance* 3.3 in. (84.4 mm) Min. 0.08 ⎯...
Page 564 6-1. Specifications Tires and wheels Type A Tire size P245/65R17 105S Driving under normal conditions Front: 30 psi (210 kPa, 2.1 kgf/cm or bar) Rear: 30 psi (210 kPa, 2.1 kgf/cm or bar) Spare: Tire inflation pressure 30 psi (210 kPa, 2.1 kgf/cm or bar) (Recommended cold tire Driving at high speeds above 100 mph...
Page 565 6-1. Specifications Type B Tire size P245/55R19 103S Driving under normal conditions Front: 30 psi (210 kPa, 2.1 kgf/cm or bar) Rear: 30 psi (210 kPa, 2.1 kgf/cm or bar) Spare: 30 psi (210 kPa, 2.1 kgf/cm or bar) Driving at high speeds above 100 mph Tire inflation pressure (160 km/h) (in countries where such speeds (Recommended cold tire...
Page 566 6-1. Specifications Type C P245/65R17 105S, T165/90D18 107M Tire size (spare) Driving under normal conditions Front: 30 psi (210 kPa, 2.1 kgf/cm or bar) Rear: 30 psi (210 kPa, 2.1 kgf/cm or bar) Driving at high speeds above 100 mph Tire inflation pressure (160 km/h) (in countries where such (Recommended cold tire...
Page 567 6-1. Specifications Type D P245/55R19 103S, T165/90D18 107M Tire size (spare) Driving under normal conditions Front: 30 psi (210 kPa, 2.1 kgf/cm or bar) Rear: 30 psi (210 kPa, 2.1 kgf/cm or bar) Driving at high speeds above 100 mph (160 km/h) (in countries where such speeds are permitted by law) Tire inflation pressure...
Page 568 6-1. Specifications Light bulbs Light Bulbs Bulb No. Type ⎯ Headlights 60/55 ⎯ Front turn signal lights ⎯ Parking/front side marker lights ⎯ Front fog lights* ⎯ Rear turn signal lights Exterior ⎯ Back-up lights Stop/tail and rear side marker ⎯...
Page 569 ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada. ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. ■...
Page 570 Toyota allows the use of oxygenate blended gasoline where the oxygen- ate content is up to 10% ethanol or 15% MTBE. ● If you use gasohol in your Toyota, be sure that it has an octane rating no lower than 87. ●...
Page 571 6-1. Specifications NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used the engine will be damaged. ● Do not use leaded gasoline. Leaded gasoline will cause the three-way catalytic converter to lose its effectiveness and the emission control system to function improperly.
Page 572 6-1. Specifications Tire information Typical tire symbols Full-size spare tire Compact spare tire Tire size (→P. 573) DOT and Tire Identification Number (TIN) (→P. 572) Uniform tire quality grading For details, see “Uniform tire quality grading” that follows. Location of treadwear indicators (→P.
Page 573 6-1. Specifications Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire. Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked “RADIAL”...
Page 574 6-1. Specifications Typical DOT and tire identification number (TIN) DOT symbol* Tire Identification Number (TIN) Tire manufacturer's identifica- tion mark Tire size code Manufacturer's optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year *: The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards.
Page 575 6-1. Specifications Tire size ■ Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits) Speed symbol...
Page 576 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. ■ DOT quality grades All passenger vehicle tires must conform to Federal Safety Requirements in addition to these grades.
Page 577 6-1. Specifications ■ Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a speci- fied government test course. For example, a tire graded 150 would wear one and a half (1 - 1/2) times as well on the government course as a tire graded 100.
Page 578 6-1. Specifications Warning: The temperature grades for this tire are established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either sepa- rately or in combination, can cause heat buildup and possible tire fail- ure.
Page 579 6-1. Specifications Tire related term Meaning 150 lb. (68 kg) times the number of occupants Normal occupant specified in the second column of Table 1 that weight follows Distribution of occupants in a vehicle as speci- Occupant distribution fied in the third column of Table 1 below The combined weight of installed regular pro- duction options weighing over 5 lb.
Page 580 6-1. Specifications Tire related term Meaning The surface area of the rim not covered by the Weather side inflated tire The part of the tire that is made of steel wires, Bead wrapped or reinforced by ply cords and that is shaped to fit the rim A breakdown of the bond between components Bead separation...
Page 581 6-1. Specifications Tire related term Meaning The parting of the innerliner from cord material Innerliner separation in the carcass (a) The sidewall that contains a whitewall, bears white lettering, or bears manufac- turer, brand, and/or model name molding that is higher or deeper than the same Intended outboard molding on the other sidewall of the tire, or sidewall...
Page 582 6-1. Specifications Tire related term Meaning A layer of rubber-coated parallel cords A parting of rubber compound between adja- Ply separation cent plies A mechanical device made of rubber, chemi- cals, fabric and steel or other materials, that, Pneumatic tire when mounted on an automotive wheel, pro- vides the traction and contains the gas or fluid that sustains the load...
Page 583 6-1. Specifications Tire related term Meaning That portion of a tire that comes into contact Tread with the road A tread section running circumferentially Tread rib around a tire Tread separation Pulling away of the tread from the tire carcass The projections within the principal grooves Treadwear indicators designed to give a visual indication of the...
Page 584 Your vehicle includes a variety of electronic features that can be personalized to your preferences. Programming these preferences requires specialized equipment and may be performed by your Toyota dealer. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer. Customized Item Function Default setting...
Page 585 6-2. Customization Customized Item Function Default setting setting Wireless remote control Driver's door unlocked in one All doors Unlocking operation step, all doors unlocked in one unlocked in two step steps Automatic door lock function to be activated if door is not opened after being unlocked Time elapsed before Wireless...
Page 586 6-2. Customization Customized Item Function Default setting setting Alarm sys- Time elapsed before 14 seconds 30 seconds the alarm is set → P. 122) Multi-infor- French mation dis- Spanish Language selection English play Chinese (→P. 194) 7.5 seconds Time elapsed before 15 seconds lights turn off 30 seconds...
Page 587 6-3. Initialization Items to initialize The following items must be initialized for normal system operation in cases such as after the battery is reconnected, or maintenance is performed on the vehicle. Item When to initialize Reference • After reconnecting or changing the Power back door battery P.
Page 588 6-3. Initialization...
Page 589 If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 590 Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité...
Page 591 Entretien et soin ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eau savonneuse tiède. Profitez de l'occasion pour vérifier régulièrement que les ceintures ne sont pas effilochées, entaillées, ou ne paraissent pas exagérément usées. ATTENTION ■ Détérioration et usure des ceintures de sécurité...
Page 592 Alphabetical index Alphabetical index A/C ....256, 263, 271, 274 Alarm.........122 ABS........... 218 Antenna........287 Active head restraints....80 Anti-lock brake system....218 Air conditioning filter....469 Armrest ........398 Air conditioning system Audio input .......307 Air conditioning filter ..... 469 Audio system Front automatic air A/V input adapter ....333 conditioning system ...
Page 593 Alphabetical index Back-up lights Care Replacing light bulbs .....486 Exterior........416 Wattage.........566 Interior........419 Back door Seat belts ......420 Back door ........71 Cargo capacity ......237 Wireless remote control ..54 Cargo hooks......400 Smart key system....33 CD changer....... 290 Battery CD player ........
Page 594 Alphabetical index Child safety Daytime running light Airbag precautions ....135 system ........205 Battery precautions ..450, 544 Defogger Child restraint system... 146 Rear window ......277 Child-protectors ...... 68 Side mirrors......277 How your child should wear Dimension.........552 the seat belt ......97 Dinghy towing ......252 Installing child restraints ..
Page 595 Alphabetical index Electric power steering ...218 Engine Electronic key Compartment ......437 If your electronic key battery is Engine switch....173, 177 discharged ......539 Hood ........432 Emergency flashers How to start the Switch........498 engine......173, 177 Emergency, in case of Identification number.....
Page 596 Alphabetical index Floor mat........399 Front side marker lights Fluid Replacing light bulbs .....486 Brake ........448 Switch........203 Washer ......... 452 Wattage.........566 Fog lights Front turn signal lights Replacing light bulbs .... 486 Replacing light bulbs .....486 Switch........207 Wattage.........566 Wattage ........
Page 597 Alphabetical index Garage door opener....406 I/M test ........427 Gas station information...608 Identification Gauges........188 Engine........553 Glove box........376 Vehicle ........553 Ignition switch....174, 177 Illuminated entry system..372 Hands-free system Indicator lights ......190 (for cellular phone) ....342 Initialization Hazard lights switch ....498 Items to initialize ....
Page 598 Alphabetical index Keyless entry......54 License plate lights Keys Replacing light bulbs .....486 Electronic key ......30 Wattage.........566 Engine switch ....174, 177 Light bulbs If the electronic key does not Replacing ......486 operate properly....539 Wattage.........566 If you lose your keys/ Lights wireless remote control Door courtesy lights ....372...
Page 599 Alphabetical index Maintenance Off-road precautions ....228 Do-it-yourself Odometer........188 maintenance .......428 General maintenance....424 Engine oil ......440 Maintenance data....552 Opener Maintenance requirements..422 Back door........71 Meter Fuel filler door ....... 111 Instrument panel light Glass hatch ......77 control .........189 Hood ........432 Meters ........188 Outside rear view mirrors Mirrors...
Page 600 Alphabetical index Radiator........447 Seat belts Radio ........284 Adjusting the seat belt.....94 Rear automatic air Automatic Locking conditioning system..... 274 Retractor .......95 Rear manual air conditioning Child restraint system system ........271 installation......151 Rear seat Cleaning and maintaining Adjustment ......82 the seat belts ......420 Folding down second Emergency Locking...
Page 601 Alphabetical index Service reminder Steering wheel indicators ......190 Adjustment ......100 Shift lever Audio switches ...... 309 Automatic transmission ..180 Climate remote control If the shift lever cannot switches......280 be shifted from P....537 Stop lights Shift lock system .....537 Replacing light bulbs.....
Page 602 Alphabetical index Tachometer......188 Tires Tail lights Chains ........238 Replacing light bulbs .... 486 Checking .......453 Switch........203 If you have a flat tire....522 Wattage ........ 566 Inflation pressure....463 Talk switch....... 347 Information ......570 Telephone switch ....347 Replacing ......522 Theft deterrent system Rotating tires ......453 Alarm ........
Page 603 Alphabetical index Valet key ........30 Washer Vanity lights Checking ....... 452 Vanity lights......389 Preparing and checking Wattage.........566 before winter....... 238 Vanity mirrors......389 Switch ......208, 210 Vehicle identification Washing and waxing ....416 number ........553 Weight Cargo capacity ...... 233 Load limits......
Page 604 What to do if... What to do if... If you have a flat tire A tire punctures P. 522 P. 535 If the engine will not start The engine does not start P. 115 Engine immobilizer system P. 541 If the battery is discharged If the shift lever cannot be shifted The shift lever cannot be P.
Page 605: Warning Lights
What to do if... If a warning light turns on or a A warning light or indicator light P. 510 warning buzzer sounds... comes on ■Warning lights Brake system warning Low fuel level warning light light P. 513 Driver’s seat belt reminder light P.
Page 606 What to do if... ABS warning light Automatic transmission fluid temper- ature warning light P. 513 Tire pressure warning light P. 511 P. 513 Electric power steering warning light P. 511 A warning message is If a warning message is displayed P.
Page 607: Gas Station Information
Cold tire inflation P. 562 pressure Engine oil capacity Drain and refill P. 556 (Reference) Toyota Genuine Motor Oil or equivalent Oil grade: P. 556 ILSAC multigrade engine oil Recommended oil viscosity: Engine oil type 2.7 L 4-cylinder (1AR-FE) engine 5W-20 and 0W-20 3.5 L V6 (2GR-FE) engine...

Toyota 2009 Highlander Owner's Manual

Quick Links

Related Manuals for Toyota 2009 Highlander

Summary of Contents for Toyota 2009 Highlander

Table of Contents