Notes On Using The Adhesive Mount (Sold Separately); Shooting Movies (Movie Mode) - Sony FDR-X3000 Read This First Manual

Universal head mount kit
BLT-UHM1
Backpack Mount
VCT-BPM1
Note
Thread a suitable leash through the leash attachment hole of the Underwater Housing, then attach the leash
to an item you intend to use with the camera.
Before use, confirm that the screw on the attachment buckle is not loose.
[19] Getting Started

Notes on using the adhesive mount (sold separately)

The adhesive mount is used for fixing the camera to an item you intend to use. The adhesive mount
is general term for the attachment buckle, flat adhesive mount, and curved adhesive mount.
Press firmly on the adhesive portion.
The adhesive strength is greatest 24 hours after the item has been attached.
The flat adhesive mount and curved adhesive mount cannot be used again once they are
detached from the location surface.
When detaching, peel off slowly. If peeled off forcibly, the surface on which the mount is fixed
might be damaged.
Before attaching, check the surface of the item to be used. If it is dirty, or dust, moisture or oily
substances are attached, adhesive strength may be impaired and the item could detach with slight
impact.
Use the appropriate adhesive mount (flat or curved) for the surface where the camera will be
located. If the mount is not suitable for the surface, it may detach by slight impact.
Before use, confirm that the screw hole on the attachment buckle is not loose, and the flat or
curved adhesive mount is securely attached to the surface.
[20] Shooting Shooting movies and still images

Shooting movies (Movie mode)

Using accessories