Controlling Relays (Not For Hipath 2000) - Siemens HiPath 2000 Operating Instructions Manual

Step by Step
qmd
or
e
Controlling Relays
(Not for HiPath 2000)
If this feature is configured (contact the service person-
nel, you can also control relays ! Page 50 in other
HiPath 3000 communications platforms.
n
Lift the handset.
qhk
Enter the code.
o
Enter the (DISA) call number of the HiPath 3000 in
which the relay is to be controlled.
r
Enter.
o
Enter the (DISA) call number of the telephone from
which you wish to control the relay.
r
Enter.
rmd
Enter the code for "on" or "off".
h w
... Enter the relay.
Special Functions in the LAN
61