Sony XBR-75X940D Reference Manual page 5

Recommended Measures to Secure the
TV
Consider the following measures when securing your TV to
a Stand (not supplied).
1
Secure the Stand for the TV.
Make sure the Stand can adequately support the weight
of the TV. Use two angle braces (not supplied) to secure
the stand. For each angle brace use the appropriate
hardware to:
• Attach one side of the angle brace to the wall stud.
• Attach the other side to the Stand.
2
Remove the stand cover and terminal cover.
(XBR-75X940D, XBR-65/55X930D only)
XBR-75X940D
2
XBR-65/55X930D
2
Angle brace
(not supplied)
Stand
3
1
1
3
Secure the TV to the Stand.
Use the optional hardware listed as follows (not
supplied):
• M6 eye bolt (screwed into the TV's rear cover).
(XBR-75X940D, XBR-65/55X930D only)
• M6 machine screws (screwed into the TV's rear cover).
(Except XBR-75X940D, XBR-65/55X930D)
• A screw or similar (attach it to the Stand).
• Rope or chain (strong enough to support the weight of
the TV). Make sure that there is no excess slack in the
rope or chain.
XBR-75X940D, XBR-65/55X930D
Screw hole on the rear cover
Rope or chain (not supplied)
Screw (not
supplied)
The length of the M6 eye bolt differs depending on the
rope or chain diameter. Please see below illustration.
8-12 mm
18 mm or more
US
M6 eye bolt
(not supplied)
5
US