Led Behaviour - GE AF-650 GP Quick Installation Manual

3.1.3 LED Behaviour

The option has 3 bi-coloured LEDs according to ODVA specifications:
LED Label Description
MS Module Status
NS1 Network Status Ethernet Port 1
NS2 Network Status Ethernet Port 2
The option LED's operates according to ODVA specifications.
State LED
No power
Device operational Green:
Standby Green:
Minor fault Red:
Major fault Red:
Red:
Self test
Green:
No IP address Yellow
Wink Yellow
Table 3.1: MS: Module Status
State LED
No IP-address (no power)
Connected Green:
Duplicate IP Red:
Red:
Self test
Green
Device has been winked Yellow
Link present at 10 Mbps Yellow
Table 3.2: NS1 + NS2: Network Status (one per port)
Description
Off The device is un-powered
Solid green The device is operational
Flashing green The device needs commissioning
Flashing red The device has detected a recoverable fault
Solid red The device has detected an un-recoverable fault
Flashing red/green The Modbus TCP option is in self-test mode
Steady yellow No IP address configured or obtained
Flashing yellow Flash for 20 seconds
Description
Off No link present (or is un-powered)
There is established (at least) one CIP connection to
Solid green
the device
The IP-address assigned to the device is already in
Solid red
use
Flashing red/green The Modbus TCP is in self-test mode
Flashing yellow Flash for 20 seconds
Steady yellow Link present; but nor winked and no ACD
Modbus TCP
3
9