Factory Settings; Switching On The Appliance; Selecting The Temperature; Set The Language - Siemens CI24RP Operating Instructions Manual

en

Factory settings

Upon leaving the factory, the appliance
has been supplied with the following
settings:
– Fascia language:
– Temperature unit:
– Refrigerator compartment
temperature:
Note
The factory settings (language, tempe-
rature unit) can be changed in the setup
mode.
Switching on the
appliance
Press the on/off button
The appliance starts to cool down
when switched on for the first time.
When the door is opened, the
interior light comes on.
Note
The preset temperatures (factory
settings) are reached after approx.
–
2 8 hours. Do not put any food in the
appliance beforehand.
To change the set temperatures –> see
"Setting the temperature" (page 8).
Downloaded from Fridge-Manual.com Manuals
8
Selecting the
temperature
The temperature can be set from +2 ° C
to +8 ° C. We recommend a setting of
English
+4 ° C.
°C
+4 °C
The temperature setting can be
changed using the + (warmer) or
(cooler) setting buttons. The tempera-
ture can be set at 1 ° C intervals.
To set the temperature:
Active the setup mode using the
< or > buttons.
.
The
displayed.
Set the desired temperature using
the + (warmer) or
buttons.
–
Q
symbol is
–
(cooler) setting

Set the language

When the appliance is operated, all
messages are displayed in fascia in
English.
Alternatively, the display languages can
be selected corresponding to the table
on page page 11.
In order to change the display language:
Press setup button
Press the selection button >, until
' %"2!
is displayed.
–
Press the + or setting button,
until the desired language is
displayed.
Press the setup button
order to store the settings. The set
temperature is displayed again in
the fascia.
.
, in