Profile Settings and Descriptions (continued)
Profile
HON:EnablePreviewOnDecodeAttempt
HON:DisablePreview
HON:EnableOOBE
HON:ScanButtonEnable
HON:ScanButtonDisable
About the Wedge Mode Profile
HONWedge Profile Commands
Profile Commands
ENABLE_WEDGE
Dolphin CT50 Mobile Computer with Windows 10 IoT Mobile Enterprise User Guide
Wedge mode enables a default list of symbologies (for example, UPCA,
Code 39, Code 128, GS1128, Aztec, Data Matrix, Maxicode, Pdf417 and
QR code). You can enable or disable Symbologies for wedge mode
using a profile named HONWedge. Profile commands customize scan
wedge mode behaviors. Customers set wedge mode configuration
commands using an .exm file. To learn more about customized profiles,
see the next section
You can use the following HONWedge profile commands to modify the
scan wedge.
Description
Controls when bar code data is inserted into
the keyboard buffer.
While in wedge mode, scanning is disabled
and enabled using the ENABLE_WEDGE
profile command.
Description
Profile not supported in ScanDemoW10.
The default profile. Disables sending images to
the application. Only decode results are shown on
the screen.
Enables the symbology types required when the
built-in Out-of-box plug-in runs at first boot for
scanning EZConfig labels. This profile allows you
to scan a prov.xml file to set up the CT50. You
cannot modify this profile.
Enables the Scan button.
Disables the scan button.
"Create a Custom Profile" on page
Chapter 3 — About the Scanner
39.
Default
True
(Enabled)
37