Configure RFID
RFID is in Server Mode by default. To configure RFID to operate in Client Mode:
Invoke the MobileRFID menu, then tap
1.
RFID Configuration Window
Figure 3-10
Select the
2.
Client Mode
In the
field, enter the port number on which the server waits for the RFID client to communicate. The
3.
LLRP Port
default is 5084.
In the
field, enter the server IP for the remote host to which RFID communicates as a client.
4.
Server IP
Tap
.
5.
Apply
Tap
to close the window.
6.
OK
Configure RFID
check box.
MobileRFID Functionality
.
3 - 7