Black & Decker 1766 Instruction Manual page 10

154408 manual 4/30/02 10:16 AM
from your distributor or local service center.
CAUTION: The use of any non-recommended accessory may be hazardous.
If you need assistance in locating any accessory call 1-800-9-BD TOOL:
(1-800-923-8665) or contact Black & Decker (U.S.) Inc., Consumer Services
Department, 626 Hanover Pike, P.O. Box 618, Hampstead, MD 21074.
1766
GRINDING WHEELS
5/8" Face, 6" dia. 60 grit medium grinding wheel
3/4" Face, 6" dia. 60 grit medium grinding wheel
5.8" Face, 6" dia. 36 grit coarse grinding wheel
1/2" Face, 6" dia. 60 grit medium grinding wheel
BUFFING WHEELS
5/8" Face, 6" dia. cotton buffing wheel
WIRE WHEEL BRUSHES
1/2" arbor, 5/8" Face, 6" dia.
1788
GRINDING WHEELS
7/8" & 1" Face, 8" dia. 60 grit medium grinding wheel
7/8" & 1" Face, 8" dia. 36 grit coarse grinding wheel
BUFFING WHEEL
5/8" arbor, 8" dia. cotton buffing wheel
WIRE WHEEL BRUSHES
5/8" arbor, 5/8"-1 1/4" Face, 8" dia.
Page 8
MAX. SAFE SPEED
4136 RPM
4136 RPM
4136 RPM
3825 RPM
3600 RPM
3600 RPM
MAX. SAFE SPEED
3600 RPM
3600 RPM
3600 RPM
3600 RPM
Every B&D tool is of the highest quality.
If you wish to contact us regarding this product, please call toll
free between 8:00am and 8:00pm ET, seven days a week:
1-800-9-BD TOOL
(1-800-923-8665)
One Year Free MaIntenance
All B&D tools for Industry and Construction are covered under a one year
free maintenance program where B&D will inspect your tool for safety and
provide necessary maintenance or repairs, including normal wear and tear
parts, for one year, FREE OF CHARGE.
Full Warranty
All B&D tools for Industry and Construction are warranted to be free of any
defects in materials or workmanship. Upon thorough examination of tool,
B&D will repair or replace, at our option, any product that is determined to
be defective.
Conditions
The service/safety check and the warranty do not apply to: repairs made or
attempted by anyone other than an authorized B&D service location; misuse,
abuse, neglect, improper application of the tool; missing parts; or normal wear
and tear (after first year of ownership). Please return the complete unit, trans-
portation prepaid, to any B&D factory owned or B&D authorized service center
location (list provided with tool or see Yellow Pages under "Tools Electric").