Power Tilt Models - Yamaha F15C Owner's Manual

Operation
shift lever in neutral.
N
2. Place the tilt lock lever in the release/up
position.
3. Slightly tilt the outboard motor up. The
tilt support bar will lock automatically,
supporting the outboard motor in a par-
tially raised position. This outboard mo-
tor has 2 positions for shallow water
cruising.
4. To return the outboard motor to the nor-
mal running position, place the remote
53
ZMU03087
N
ZMU05533
ZMU05548
control lever / gear shift lever in neutral.
5. Place the tilt lock lever in the lock/down
position, then slightly tilt the outboard
motor up until the tilt support bar auto-
matically returns to the free position.
6. Slowly lower the outboard motor to the
normal position.
EMU32862

Power tilt models

The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM00261
NOTICE
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
EMU32953
Procedure for power tilt models
1. Place the remote control lever in neutral.
ZMU05541