Guide Print Function - Sony UPX-C200 Operating Instructions Manual

Guide Print Function

You can print a guide image for changing the RGB
parameters or for changing the DLGm parameters. To
print this guide image, press the SIZE button of the
camera, select either Guide Print-RGB or Guide Print-
DLGm, then execute printing.
UPX-C200
Guide Print
(RED, GRN, BLU)
DARK = 0
LIGHT = 0
GAMMA = 0
R - 3 : = (-3, 0, 0)
G + 3 : = (0, +3, 0)
Guide Print-RGB (RGB Parameter Adjustment)
If you press the SIZE button of the camera, select Guide
Print-RGB, then execute printing, the guide image
(adjustment simulation) for changing the RGB
parameters is printed out. The simulation is based on the
Current DARK, LIGHT, and
GAMMA parameter values for
reference
Picture of the current RED,
GREEN, and BLUE parameter
values
The RED parameter is changed
by –3 from the current value.
The picture becomes darker and
the cyan becomes strong.
The GREEN parameter is
changed by +3 from the current
value.
The saturated white part does
not change. The picture
becomes brighter and greenish.
The values given under each picture are their RGB
parameter values. For example, the top left picture in the
above figure has the following values: (RED, GREEN,
BLUE) = (0, 0, +3). To achieve that hue, set the B
parameter to +3. To make further adjustments based on
B + 3 : = (0, 0, +3) G - 3 : = (0, -3, 0)
-
now : = (0, 0, 0) R + 3 : = (+3, 0, 0)
CAMERA
EV : 0.00
WB : AUTO
B - 3 : = (0, 0, -3)
UPX-C200
Guide Print
(RED, GRN, BLU)
DARK = 0
LIGHT = 0
GAMMA = 0
B + 3 : = (0, 0, +3)
R - 3 : = (-3, 0, 0) now : = (0, 0, 0)
G + 3 : = (0, +3, 0)
A guide image can be printed on either UPC-X46 series
or UPC-X34 series print paper.
The figure below gives examples of the guide images.
D + 3 : = (+3, 0, 0) L + 3 : = (0, +3, 0) Gm + 3 : = (0, 0, +3)
UPX-C200
Guide Print
(DARK, LIGHT, GAMMA)
now : = (0, 0, 0)
D - 3 : = (-3, 0, 0) L - 3 : = (0, –3, 0) Gm - 3 : = (0, 0, -3)
picture shown on the camera; you can actually see what
the result of the adjustment looks like.
The center picture is based on the current values.
Around the center picture, six pictures of different color
adjustments are printed.
The BLUE parameter is changed by
+3 from the current value.
The saturated white part does not
change. The picture becomes
brighter and bluish.
The GREEN parameter is changed
by –3 from the current value.
The picture becomes darker and the
magenta becomes strong.
G - 3 : = (0, -3, 0)
The RED parameter is changed by
+3 from the current value.
-
The saturated white part does not
change. The picture becomes
brighter and reddish.
R + 3 : = (+3, 0, 0)
The BLUE parameter is changed by
–3 from the current value.
CAMERA The picture becomes darker and
EV : 0.00
yellowish.
WB : AUTO
B - 3 : = (0, 0, -3)
Shooting conditions of the camera
the top left picture, set the B parameter to +3, then print
the Guide Print-RGB again. This time, the center picture
is based on (RED, GREEN, BLUE) = (0, 0, +3), and the
surrounding pictures are the results of the changes with
reference to the center picture.
-
PRINTER
RED (CYN) = 0
GRN (MAG) = 0
BLU (YLW) = 0
-
CAMERA
EV : 0.00
WB : AUTO
-
Print Quality Adjustment of the Printer
19