Siemens SINUMERIK 840D sl Programming Manual page 371

● Positional deviation during calibration in the plane
● Probe number
● Safe area
Workpiece measurement
● Measuring cycle and measuring variant
● Setpoints, actual values and their differences
● Tolerance upper and lower limits (for tool offset)
● Compensation value
● Probe number
● Safe area and permissible dimensional difference
● T number, D number, and DL number or ZO memory number for automatic offset
Example of measurement result display
Measuring cycles
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
Miscellaneous functions
7.3 Measuring result screens
371