Assembling The Burner - Miele CS 1011 Operating And Installation Instructions

Cleaning and care

Assembling the burner

 Place the burner head  onto the
burner base  so that the thermo-
couple  and the ignitor  extend
through their respective holes.
The lobe  on the burner cap must
fit into the recess  on the burner
head. The lobe  on the burner head
must fit into the recess  on the
burner base.
 Replace the burner ring .
 Then place the burner caps  and 
in position.
Ensure parts are reassembled in the
correct order.
32