Toro 74310 Setup Instructions page 10

10
Checking the Machine Before Delivery to the Customer
No Parts Required
Procedure
Before delivering the machine to the customer, ensure that you perform or have performed the procedures listed in the
following table and initial each when finished. Refer to the Operator's Manual for instructions on performing these procedures.
Initial
When you finish setting up the machine, sign and date in the space provided below:
Signature:
Check the tire pressure.
Check the level of the machine.
Check the mower deck gearboxes for oil.
Check the engine-oil level.
Check the hydraulic-fluid level.
Check the adjustment of the parking brake.
Ensure that the machine tracks correctly; refer to the Operator's Manual for the adjustment procedure.
Check the safety interlock system; refer to the Operator's Manual.
Ensure that the PTO works.
Check all fasteners that you installed to ensure that they are tight.
Check Procedure
Date:
10