Panasonic KX-NS1000 Getting Started page 31

6.
In SNTP / Daylight Saving, enter information for Automatic Time Adjustment and Daylight Saving, and
then click Next.
7.
In Maintenance Setting, the Installer password, information for SNMP Setting and SNMP Manager can
be entered.
8.
Follow the prompts of the Easy Setup Wizard. After the Easy Setup Wizard is completed, if LAN settings
have been changed from their default values in step 4, you will be prompted to restart the PBX. Click OK
to restart the PBX. Otherwise, the login screen will be displayed.
9.
Log in with the Installer level account using the password entered during Easy Setup Wizard.
The Home Screen is displayed. You may now begin programming the PBX.
Notice
•
Do not change the IP address of the PBX once IP telephones are registered to the PBX using the set
IP address. The IP telephones will not operate properly if the IP address of the PBX is changed. When
an external DHCP server is used to automatically assign IP addresses, it must be configured to always
allocate the same IP address to the PBX. For details, consult your network administrator.
•
If an external DHCP server is in use, it must be able to use a "client identifier" option specified by RFC
2131.
•
The PBX will not start properly if IP addresses cannot be assigned automatically by the DHCP server
when the PBX has been set to obtain IP addresses automatically. In this case, you need to consult
your network administrator because the DHCP server in your network may not be running or a network
failure may have occurred. If the DHCP server is not available, enter IP addresses manually, then
restart the PBX. If the PBX cannot be accessed over the network, connect the PC directly to the PBX
with an Ethernet cable and access Web Maintenance Console using a direct connection.
For details about connecting the PC directly to the PBX, refer to "Direct Connection" in "3.2 Connecting
the PC".
a.
Enter a password for the Installer level account in
Installer password. Confirm your input in
Re-enter.
b.
Specify settings for SNMP Setting and SNMP
Manager if necessary. If you are unsure of your
network's SNMP settings, contact your network's
administrator.
c.
Click Finish.
4.1.1 Easy Setup Wizard
Getting Started 31