Panasonic KX-TDA100 Pc Programming Manual page 816

3.2 Feature Programming References
• 2.9.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—CF (MSN)
Feature Guide Reference
1.21.1.5 Call Forwarding (CF)—by ISDN (P-P)
Call Forwarding (CF)—by QSIG
• 2.8.14 [1-1] Slot—Port Property - BRI Port—Supplementary Service—COLP, CLIR, COLR,
CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, 3PTY
• 2.8.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—
Supplementary Service—COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting),
CT, CCBS, AOC-D, AOC-E, 3PTY
Feature Guide Reference
1.30.4.3 Call Forwarding (CF)—by QSIG
Call Hold
• 2.9.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
–
–
• 2.9.8 [2-6-1] Numbering Plan—Main—Features
–
–
–
• 2.9.17 [2-9] System Options
–
–
–
Feature Guide Reference
1.13.1 Call Hold
Call Hold (HOLD)—by ISDN
• 2.9.8 [2-6-1] Numbering Plan—Main—Features—ISDN Hold
• 2.11.5 [4-1-4] Wired Extension—Flexible Button—Type
• 2.11.13 [4-2-3] Portable Station—Flexible Button—Type
• 2.11.17 [4-3] DSS Console—Type
Feature Guide Reference
1.21.1.6 Call Hold (HOLD)—by ISDN
Call Monitor
• 2.9.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—Call Monitor
• 2.9.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—Call Monitor
• 2.11.1 [4-1-1] Wired Extension—Extension Settings
–
–
• 2.11.10 [4-2-1] Portable Station—Extension Settings—Option 3—Executive Override Deny
Feature Guide Reference
1.8.3 Call Monitor
816 PC Programming Manual
Recall—Hold Recall
Recall—Disconnect after Recall
Call Hold / Call Hold Retrieve
Call Hold Retrieve : Specified with a Holding Extension Number
Hold Retrieve : Specified with a Held CO Line Number
Option 1—PT Operation—Automatic Hold by ICM / CO / ICD Group key
Option 1—PT Operation—Hold Key Mode
Option 4—SLT—SLT Hold Mode
Option 2—Data Mode
Option 3—Executive Override Deny