1-3] Option - Panasonic KX-TDA50 Pc Programming Manual

3.35 [1-3] Option

3.35 [1-3] Option
System options can be programmed.
It is possible to clear the master CS information (Master CS Port and Radio System ID) by following the
procedure below in batch mode:
1.
Click Clear Master CS.
2.
Click Yes. To abort the procedure, click No.
If the system data is downloaded to the PBX after the master CS information has been cleared, it is necessary
to register all PSs again in the interactive mode. Master CS information will be assigned automatically when
a CS is connected to the PBX. Without the Radio System ID, PSs cannot be registered.
System Wireless—System ID
Indicates the radio system ID used to register a PS (reference only).
Default
Not stored.
Value Range
Not applicable.
Maintenance Console Location
3.35 [1-3] Option
Programming Manual References
None
Feature Manual References
None
System Wireless—CO Status Display in Standby (KX-WT125/126 only) (Need
System Restart) (KX-TDA50 only)
Enables the display of a KX-WT125/KX-WT126 PS to be updated when the status of a CO line changes, even
when the PS is idle.
Default
Enable
Value Range
Enable, Disable
Maintenance Console Location
3.35 [1-3] Option
Programming Manual References
6.17 [4-2-6] Portable Station—Single CO Appearance (KX-TDA50 only)
232 PC Programming Manual Document Version 2010-11