Rear End Door Opener Switch Inspection
(Hatchback Model)
1) Remove rear end door trim.
2) Disconnect rear end door switch coupler.
3) Check that there is continuity between terminals "a"
and "b" when rear end door opener switch (1) is
pushed.
4) Check that there is no continuity between terminals
when rear end door opener switch (1) is not pushed.
If check result is not as specified, replace switch.
Trunk Lid Lock Assembly Components (Sedan Model)
[A]
[B]
1. Trunk lid latch
2. Trunk lid lock cylinder
3. Latch striker
4. Trunk lid actuator
S7RW0A9606013
[B]
7
2
4
5. Trunk lid license garnish
6. Trunk lid request switch bracket
7. Trunk lid request switch
[A]: Without keyless start model
"a"
[B]
6
1
(a)
(a)
[B]: With keyless start model
Security and Locks:
1
"b"
I5RW0A960009-02
S7RW0A9606019
5
3
I7RW0A960002-02
: 4.5 N⋅m (0.45 kgf-m, 3.5 lb-ft)
9F-13