Nokia 3600 User Manual page 105

9
Options when editing e-mail settings are: Editing options, New mailbox,
Delete, Call, and Exit.
Open Mailbox in use to select which mailbox you want to use.
SETTINGS FOR MAILBOXES
Select Mailboxes to open a list of mailboxes that have been defined. If no
mailboxes have been defined, you will be prompted to do so. The following
list of settings is shown:
• Mailbox name - Write a descriptive name for the mailbox.
• Access point in use (Must be defined) - The Internet Access Point (IAP)
used for the mailbox. Choose an IAP from the list. For more information
on how to create an IAP, see "Connection settings" on page 33.
• My mail address (Must be defined) - Write the e-mail address given to
you by your service provider. The address must contain the @
character. Replies to your messages are sent to this address.
• Outgoing mail server: (Must be defined) - Write the IP address or host
name of the computer that sends your e-mail.
• Send message - Define how e-mail is sent from your phone.
Immediately - A connection to the mailbox is started immediately
after you have selected Send. During next conn. - e-mail is sent when
you connect to your remote mailbox the next time.
• Send copy to self - Select Yes to save a copy of the e-mail to your
remote mailbox and to the address defined in My mail address.
• Include signature - Select Yes if you want to attach a signature to your
e-mail messages and to start to write or edit a signature text.
• User name: - Write your user name, given to you by your service provider.
• Password: - Write your password. If you leave this field blank, you will
be prompted for the password when you try to connect to your
remote mailbox.
• Incoming mail server: (Must be defined) - The IP address or host name
of the computer that receives your e-mail.
• Mailbox type: - Defines the e-mail protocol your remote mailbox
service provider recommends. The options are POP3 and IMAP4.
[ 98 ]